13CQ-RG153U7ENGLISHTo stop rewind or fast forward, gently press the button that is not in use.The tape will resume playing from that position.Top Side Playing Bottom Side PlayingPlay Side ChangePress [a] and [f] at the same time to switch to the program on the other side of the tape.The display changes to indicate which program is playing.wRewind and Fast ForwardWhen the program indicator i lights, press [a] to rewind or press [f]to fast forward the tape.When the program indicator o lights, press [a] to fast forward or press[f] to rewind the tape.eNote: To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes (C-90).Notes on Cassette TapesTape Slack:Use a pencil or similar object to take up the slack asshown. If a loose tape is used, this may result in thetape becoming tangled in the rotating parts of the unit.Do not touchor pull out thetape.PencilExposed end(Open end)blinks12 CQ-RG153U6ENGLISHRG153UTRTLOU DMONOMUTEDISCSCAN REPEAT RANDOM12 346VOL/PUSHSEL5CD-CCQ-RG153UDISPTRACKTUNELOU DMONOMUTEDISCSCAN REPEAT RANDOM12 346APMBANDPWRVOL/PUSHSEL5DISPCassette Tape PlayerLoading a CassetteGently insert a cassette with the exposed tape side fac-ing to the right until the mechanism captures it, andplayback starts.qStop and EjectOnce inserted into the unit, your tape will play continuously until you eject it.If you press [u] (eject), the unit ejects the tape and returns to radio operation.When you stop the car engine, the tape will stop but not be ejected.Notes:• You can not change to CD Changer mode or Radio mode while tape playing.If you want to change to CD Changer mode or Radio mode, eject the tape.• Always remove the cassette when you stop using the cassette player. This willprolong the life of your tape.Exposed Tape sideProgram Indicator(This indication “ ” rotates.)Display ChangePress [DISP] (display) to switch to the clock display.Tape Clock display