Panasonic CS-E9DKEW Operating Instructions Manual

Also see for CS-E12DKEW: Service manual Service manual Service manual Service manual

Contents

Panasonic CS-E9DKEW Operating Instructions Manual Manual pdf 4 page image

4■ Operation DetailsAuto, Heat, Cool, Dr y2Select theelect thedesireddesiredoperation.operation. 3Set theet thetemperature.temperature.(16(16°C~30°C)SStart theoperation.operation.1HOW TO OPERATE● Supersonic air purifying device (super alleru-buster) operatesautomatically while the air conditioner is switched on.● Powerful, Quiet and Ion operations could be activated in alloperation modes.● Press button again to stop the operation.AUTO - Automatic Operation• Enables you to enjoy the coolingeffect at your preferred settingtemperature.COOL - Cooling Operation• Enables you to set the desiredtemperature at low fan speed whichprovides you with the dehumidifyingsurroundings.DRY - Soft Dry Operation• The unit will automatically selectthe operation mode accordingto the setting, outdoor and roomtemperature. During operation modeselection, power indicator blinks.For every 30 minutes, the operationmode is reselected.• Enables you to enjoy the warmingeffect at your preferred settingtemperature.• For cold air prevention, air mightnot blow out immediately andpower indicator blinks whenoperation starts.• Also operates in defrost mode(maximum 10 minutes) where bythe power indicator blinks. Themelted frost is drained at outdoorunit and indoor fan is stopped.HEAT - Heating OperationAUTOCOOLHEATDRYTroubleshooting● The room has a peculiar odour. ➤ This may be a damp smell emitted by the wall, carpet, furniture orclothing in the room.● Air conditioner does not cool or heat efficiently. ➤ Ensure the temperature has been set correctly.➤ Ensure windows and doors have been closed properly.➤ Ensure fi lters are cleaned or replaced when necessary.➤ Ensure inlet and outlet vents of the units have not been obstructed.● To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.Hint