4CANCELOFFTIMER ONTIMERSPEEDFANAUTOHEATDRYCOOLOFFTIMERON1 2 3OFFCLOCK RESETSETTEMPAIR SWINGOFF/ONQUIETAUTOMANUALCHECKCANCELTIMERON1 2 3OFFCLOCK RESETSETCHECKOFF/ONTEMPMaximum distances : 8m• In heat mode, it takes a while for the unit to warm up. Thepower indicator blinks during this operation.HOW TO OPERATEREMOTE CONTROL TRANSMITTERAUTO MODE - FOR YOUR CONVENIENCEHEAT MODE - TO ENJOY WARM AIR• Make sure it is not obstructed.• Certain fluorescent lights may interfere with signal transmission.Please consult your nearest dealer.CloseInsert AAA orR03 batteriesPull outInserting the batteries• The batteries can be used for approximately 1 year.Replace the batteries when the remote control display ortransmission signal becomes weak.Setting the current timeSelect Turn on AdjusttemperatureSet timeConfirmPressREMOTE CONTROL PREPARATIONREMOTE CONTROL PREPARATIONREMOTE CONTROL PREPARATIONREMOTE CONTROL PREPARATIONMODE OPERATIONMODE OPERATIONMODE OPERATIONMODE OPERATIONAUTO HEATDRY COOLINDICATORINDICATORINDICATORINDICATOR• Unit selects the operation mode according to temperaturesetting, outdoor and room temperature.• Operation mode is reselected every 30 minutes. Duringinitial operation mode selection, the power indicator blinks.COOL MODE - TO ENJOY COOL AIR• During soft dry operation, the indoor fan operates at lowfan speed to give a very gentle cooling operation.● The range of temperature for selection is 16°C ~ 30°C.● Operating the unit within the recommendedtemperature could induce energy saving.HEAT MODE : 20°C ~ 24°C.COOL MODE : 26°C ~ 28°C.DRY MODE : 1°C ~ 2°C lower than room temperature.DRY MODE - TO DEHUMIDIFY THEENVIRONMENTRemotecontroldisplayNotes:• Press button to restore the remote control’s defaultsetting.• While using remote control, please be aware of the OFFindication on the remote control display to prevent the unitfrom starting / stopping improperly.(Green)(Orange) (Orange)(Orange)(Orange)