Panasonic CS-E9HKEA Service Manual

Also see for CS-E12HKEA: Operating instructions

Panasonic CS-E9HKEA Service Manual Manual pdf 34 page image

3413 Servicing Mode13.1. Auto Switch OperationThe below operations will be performed by pressing the “AUTO” switch.1. AUTO OPERATION MODEThe Auto operation will be activated immediately once the Auto Switch is pressed and release before 5 sec..2. TEST RUN OPERATION (FOR PUMP DOWN/SERVICING PURPOSE)The Test Run operation will be activated if the Auto Switch is pressed continuously for more than 5 sec. to below 8 sec..A “beep” sound will occur at the fifth sec., in order to identify the starting of Test Run operation.3. HEATING TRIAL OPERATIONPress the AUTO switch continuously for more than 8 sec. to below 11 sec. and release when a “beep, beep” sound is heard ateight sec. (However, a “beep” sound is occurred at fifth sec.) then press remote controller “A/C Reset” button once. Remotecontroller signal will activate operation to force heating mode.4. REMOTE CONTROLLER RECEIVING SOUND ON/OFFThe ON/OFF of remote controller receiving sound can be change over by following steps:a. Press the AUTO switch continuously for more than 16 sec. to below 21 sec. a “beep, beep, beep, beep” sound will occurat the sixteenth sec..b. Press the “A/C Reset” button once. Remote controller signal will activate the remote controller sound setting mode.c. Press the “Check” button once at remote controller. A “beep” sound will occur.d. Press the AUTO switch once to select remote controller receiving sound ON/OFF. A “beep” sound indicates receivingsound ON, and a long “beep” sound indicates receiving sound OFF.13.2. Indicator PanelNote:• If POWER LED is blinking, the possible operations of the unit are Hot Start, during Deice operation, operation mode judgment, orON timer sampling.• If Timer LED is blinking, there is an abnormality operation occurs.• If Ionizer, LED is blinking, there is an abnormality of Ionizer occurs.LED POWER TIMER QUIET POWERFUL ION ALLERGEN BUSTERColor Green Orange Orange Orange Green BlueLight ON Operation ON Timer Setting ON Quiet Mode ON Powerful Mode ON Ion Mode ON Operation ONLight OFF Operation OFF Timer Setting OFF Quiet Mode OFF Powerful Mode OFF Ion Mode OFF Operation OFF