Panasonic CS-KE30NKU Technical & Service Manual

Also see for CS-KE30NKU: Installation instructions

Contents

Panasonic CS-KE30NKU Technical & Service Manual Manual pdf 73 page image

13SETTING THE TIMERIn the descriptions below, the following settings are used for thetemperature and time indicator selector button on the bottom frontsection of the remote controller.• Temperature: °F• Time: AM, PM1. How to set the present time(Example) To set to 10:30 pm.2. How to set the OFF time(Example) To stop the air conditioner at 11:00 am.3. How to set the ON time(Example) To start operation at 7:10 am.Operation Indication1. Press the CLOCK buttononce if the time indicator isnot flashing.The time indication aloneflashes.2. Press the Advance, Return( , ) button until PM 10:30is displayed.The time can be set in 1-minuteincrements. Holding down thebutton advances the time rapidlyin 10-minute increments.3. Press the CLOCK buttonagain.This completes the setting of thecurrent time.NOTEOperation Indication1. Press the OFF TIME settingbutton once.The timer indication isdisplayed, and the present OFFtime is shown.2. Press the Advance, Return( , ) button until AM 11:00is displayed.The timer indicationblinks.The time can be set in 10-minuteincrements. Holding down thebutton advances the time rapidlyin 10-minute increments.3. Wait a few seconds, and thenthe setting is complete.The timer indicationstops blinking and the presenttime is displayed.Operation Indication1. Press the ON TIME settingbutton once.The timer indication isdisplayed, and the present ONtime is shown.2. Press the Advance, Return( , ) button until AM 7:10is displayed.The timer indicationblinks.The time can be set in 10-minuteincrements. Holding down thebutton advances the time rapidlyin 10-minute increments.3. Wait a few seconds, and thenthe setting is complete.The timer indicationstops blinking and the presenttime is displayed.