8.7.2. Manual Control• When the vertical airflow direction is set to Manual using theremote control, the automatic airflow is released and theairflow direction louver move up and down in the rangeshown in the diagram.• The louver can be adjusted by pressing the button to thedesired louver position.• When stop operation using the remote control, thedischarge vent is reset, and stop at the closing position.• During Anti-dew condensation prevention, Airflow DirectionManual control angle change from 10°, 14°, 18°, 22°, 27° to10°, 13°, 16°, 19°, 22° under Cooling and Soft Dry operationmode.• When the horizontal airflow direction is set to Auto using theremote control, the vanes swings left and right for Coolingand Soft Dry (0°-44°) as shown in the diagram.• When stop operation using the remote control, the vanes isreset, and stop at the reset position.• During Cooling operation or Soft Dry operation, indoor fanmotor may stop to rotate at certain periods. At thatcondition, the vanes will stop swinging and rest at 22°.• During Anti-dew condensation prevention, Airflow DirectionAuto-control angle change from 0°-44° to 14°-30° underCooling and Soft Dry operation mode.• When the horizontal airflow direction is set to Manual usingthe remote control, the automatic airflow is released and theairflow direction vane move left and right in the range shownin the diagram.The louver can be adjusted by pressing the button to thedesired vane position.Cooling and Soft Dry Operation8.8. Horizontal Airflow Direction Control8.8.1. Auto Control8.8.2. Manual Control• When stop operation using the remote control, the vanes is reset, and stopped at reset position.• During Anti-dew condensation prevention, Airflow Direction Manual control angle change from 0°, 11°, 22°, 33°, 44° to 14°, 18°,22°, 26°, 30° under Cooling and Soft Dry operation mode.23CS-V18DKE CU-V18DKE / CS-V24DKE CU-V24DKE