10POWER NANOE-G TIMER +8/10°CINDOOR UNITCLEANING INSTRUCTIONSCLEANING INSTRUCTIONS HINTHINT• Do not use benzene, thinner or scouring powder.• Use only soap ( pH7) or neutral household detergent.• Do not use water hotter than 40°C.• To ensure optimal performance of the unit, cleaningmaintenance has to be carried out at regular intervals.Dirty unit may cause malfunction and you may see errorcode “H99”. Please consult authorized dealer.291731086 HUMAN ACTIVITY SENSOR• Do not hit or violently press the sensor orpoke it with a sharp object. This can leadto damage and malfunction.• Do not place large objects near thesensor and keep away heating unitsor humidifi ers from the sensor’sdetection area. This may lead to sensormalfunction.11 nanoe-G GENERATOR• Do not touch during operation.51 INDOOR UNIT• Wipe the unit gently with a soft, dry cloth.2 FRONT PANEL WITH MOVABLE PANELRemove Front Panel• Raise and pull to remove the front panel.• Wash gently and dry.Close Front Panel• Press down both ends of the front panel to close it securely.• Do not remove the movable panel from front panel.3 REMOTE CONTROL RECEIVER4 SUNLIGHT SENSOR5 ALUMINIUM FIN6 HUMAN ACTIVITY SENSOR7 HORIZONTAL AIRFLOW DIRECTION LOUVER• Do not adjust by hand.8 VERTICAL AIRFLOW DIRECTION LOUVER• Do not adjust by hand.• Switch off the power supply and unplug before cleaning.• Do not touch the aluminium fin, sharp parts may cause injury.4F568728_YB0512-1062.indb 10F568728_YB0512-1062.indb 10 6/11/2012 9:43:33 AM6/11/2012 9:43:33 AM