6RemoteControl display321Maximum distance: 7mHuman activity sensorREMOTE CONTROLMovable panelIndicator(Blue) (Orange) (Green)(Green)POWER NANOE-G TIMER +8/10°C(Green)Press the remote control’s button1 TO SELECT OPERATION MODE POWERAUTO mode - For your convenience• During operation mode selection the power indicator blinks.• Unit selects operation mode every 30 minutes according totemperature setting, outdoor and room temperature.HEAT mode - To enjoy warm air• Unit takes a while to warm up. The power indicator blinks during thisoperation.• This air conditioner removes frost automatically by two types ofoperation.• Unit removes ice formed on outdoor unit by methods below.• Deice with heating operation (HEAT CHARGE Operation).Unit has a heat absorbing device which accumulates heatgenerated by outdoor unit while performing the heating operationto remove ice formed on outdoor unit for maximum 6 minutes.During this operation, the discharge temperature and fan speedmay be lowered when outdoor temperature is low, or the room isnot warmed up suffi ciently, or set temperature is high.• Deice without heating operationUnit stops heating operation to remove large amount of iceformed on outdoor unit for maximum 12 minutes.During this operation, the power indicator blinks and the verticalairfl ow direction louver is left open.The heating operation resumes once this operation is completed.COOL mode - To enjoy cool air• Use curtains to screen off sunlight and outdoor heat to reduce powerconsumption during cool mode.DRY mode - To dehumidify the environment• Unit operates at low fan speed to give a gentle cooling operation.MOVABLE PANEL• Opens for air intake when operation starts, and closes when operationstops. During this time, do not hold it as it may cause malfunction orbreakdown.F568728_YB0512-1062.indb 6F568728_YB0512-1062.indb 6 6/11/2012 9:43:26 AM6/11/2012 9:43:26 AM