Panasonic CZ-256ESMC2 Operation Manual
Also see for CZ-256ESMC2: Operation manualOperation manual
                                                            | |
Contents
|
3-152Control of 2WAY SYSTEM1234567898. Intelligent Controller (CZ-256ESMC2)446 Using the System6.5.5.2 Saving dataProceed as follows to back up setting data and totals data to optional PC Cards.ProcedureComplete the cut-off processing described in “6.5.5.1 Manual cut-off processing” and then executethe following backup procedure.4 Insert a PC card and touch the Backup button.5 When a window like the one shown belowappears, touch the OK button.* When keeping the PC card inserted in a unit, data therein are automatically backed up once a day (atevery 0 o’clock at midnight).6.5.5.3 Outputting distribution data in progressSave distribution data (total data) in progress before cut-off processing in PC cards (optionallyavailable) following the procedure stated below.Procedure7 Insert a PC card and touch the Distrib. dt out button.8 When a screen like the one shown below appears, touch the OK button.As data output by pressing the Distrib. dt out button are strictly in progress, it is impossibleto apply these data for cut-off processing for the tenant who leaves halfway. (Manual cut-offprocessing is necessary).Main Sub22 556 When a window like the one shown belowappears, touch the Check button.456 Using the System9 When a screen like the one shown below appears, touch the Check button.[File form]A ¿le name is ¿xed as follows according to the year, month, and date when the distribution dataoutput was carried out.20060316A.csv (Example of a ¿le output on March 16, 2006)When outputting repeatedly on the same day, the last “A” varies as B, C, D, and so forth.(Outputting is possible up to 26 times a day).Data composition in the ¿le is the same as that in a cut-off processing ¿le.[Caution]Distribution data ¿les are stored in the “Data” folder.Copy output distribution data ¿les to your PC and then delete them from the PC card.When distribution data ¿les are too many, normal backups of cut-off data may become impossible.6.5.5.4 Restoring dataProceed as follows to restore setting data and total data from optional PC Cards.Procedurebk Insert a PC card and touch the Restore button.bl When a window like the one shown belowappears, touch the OK button.* When trying to restore data backed up using an old-version Intelligent Controller, a message “Unsupported¿le version. Perform Restore?” will be displayed; con¿rm the message and touch “Yes”.After completing restoring, “Rebooting.” will be displayed and then touch “OK”. The data restored will beeffective after rebooting. (After “Converting data” is displayed for a while, the system will automaticallyreboot again.)* Everyday, at 23:30 to 00:00, cut-off processing take place, when you cannot press the Restore button.Main Sub22 55bm When a window like the one shown belowappears, touch the Check button.Use the special optional PC Cards to back up and restore Intelligent Controller data. For details about usingPC Cards, refer to the instructions of the PC Cards.Depending on the amount of data, backup and restore operations may require up to 15 minutes. |
Related manuals for Panasonic CZ-256ESMC2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine