Panasonic CZ-256ESMC2 Operation Manual
Also see for CZ-256ESMC2: Operation manualOperation manual
                                                            | |
Contents
|
3-162Control of 2WAY SYSTEM1234567898. Intelligent Controller (CZ-256ESMC2)646 Using the System6.8.8 Indoor unit settingsYou can use this screen to check the air conditioning capacity of indoor units, and to set the capacity.Normally you do not need to change settings with this screen.Exercise care when changing settings, because improper settings can prevent accuratedistribution.ProcedureSelect 6.Auxiliary settings in the main menu and 8.I/D unit settings in the sub menu.*When “No Distrib.” is selected, this screen is not accessible. (see Main Sub1155 )1 Select the link system to display.13421.Status/Control2.Total data/Cut-off3.Distrib. ratio/Usage4.Maintenance/Test Run5.Initial settings6.Auxiliary settings1.Zone name2.ZoneNo./Mng.target3.Program timer4.Ten.Ho/TimerSp.Day5.Prohibit R/C6.Distribution time zone7.Special distrib. day8.I/D unit settings10.WEB settings11.User settings9.Other settings2 To change a capacity setting, touch an item in the capacity column, and enter a kW capacityfrom 0 to 999.9 in the numeric keypad window which appears.3 Touch Set to con¿rm the setting.Or Auto to cancel it. (The capacity value will restore the received level)If you have changed the capacity, an asterisk ( ) appears to the left of the value.4 Touching the heater capacity column for the indoor unit having an electric heater will have a softten-key for the heater capacity setting displayed. Input numbers 0.0 to 100.00 by kW. However,these are effective only for loaded distribution settings.Main Sub66 88656 Using the System6.8.9 Other settingsYou can use this screen to register passwords, initialize data, and make power saving settings forthe LCD display.ProcedureSelect 6.Auxiliary settings in the main menu and 9.Other settings in the sub menu.1.Status/Control2.Total data/Cut-off3.Distrib. ratio/Usage4.Maintenance/Test Run5.Initial settings6.Auxiliary settings1.Zone name2.ZoneNo./Mng.target3.Program timer4.Ten.Ho/TimerSp.Day5.Prohibit R/C6.Distribution time zone7.Special distrib. day8.I/D unit settings10.WEB settings11.User settings9.Other settings123456786.8.9.1 Checking the connection con¿guration1 Touch the Chk con¿g. button to check the connection con¿guration of the system.You should do this after adding or deleting units, changing addresses, and so on.If the system con¿guration has changed, cut-off processing and con¿rmation of the systemprocessing messages appear. For details, see “6.9 System Con¿guration Changes”.Up to 10 minutes may be required to check the system con¿guration.Main Sub66 99 |
Related manuals for Panasonic CZ-256ESMC2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine