- 123 -Connecting to other equipment∫ Installing supplied software• Before inserting the CD-ROM, close all running applications.Check the environment of your PC.• Operating environment of “PHOTOfunSTUDIO 9.0 SE”– OS:WindowsR XP (32bit) SP3,Windows VistaR (32bit) SP2,WindowsR 7 (32bit/64bit) or SP1WindowsR 8 (32bit/64bit)– CPU:PentiumR III 500 MHz or higher (WindowsR XP),PentiumR III 800 MHz or higher (Windows VistaR),PentiumR III 1 GHz or higher (WindowsR 7/WindowsR 8)– Display:1024k768 pixels or more (1920k1080 pixels or more recommended)– RAM:512 MB or more (WindowsR XP/Windows VistaR),1 GB or more (WindowsR 7 32bit/WindowsR 8 32bit),2 GB or more (WindowsR 7 64bit/WindowsR 8 64bit)– Free hard disk space:450 MB or more for installing software• Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operatingenvironment.Insert the CD-ROM with the supplied software.• When you insert the supplied CD-ROM, the install menu will start.Click on the [Applications] on the install menu.Click on the [Recommended Installation].• Proceed with installation according to messages appearing on the screen.• The software compatible with your PC will be installed.• “PHOTOfunSTUDIO” and “LoiLoScope” are not compatible with Mac.
