- 152 -Others• Is the camera connected to the PC correctly?• Is the camera recognized by the PC correctly?> Select [PC] when connecting. (P124)> Turn this unit off and on.> Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.> If there are two or more USB terminal on a single PC, try connecting the USB connection cableto another USB terminal.> Check if your PC is compatible with SDXC memory cards.http://panasonic.net/avc/sdcard/information/SDXC.html> A message prompting to format the card may be displayed when connecting, but do not format.> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USBconnection cable after turning this unit off.• Pictures cannot be printed using a printer that does not support PictBridge.> Select [PictBridge(PTP)] when connecting. (P127)> When using a printer with a Cropping or borderless printing function, cancel this function beforeprinting. (For details, refer to the operating instructions for the printer.)> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can beprinted.• Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possibleto print it correctly.> Please use a printer that supports panorama pictures. (For details, please see the operatinginstructions of your printer)> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to adjustthe size of the still picture to the print paper size.Cannot communicate with the PC.The card is not recognized by the PC. (The built-in memory is recognized.)The card is not recognized by the PC. (SDXC memory card is used)The picture cannot be printed when the camera is connected to a printer.The ends of the pictures are cut at printing.The panorama picture is not printing correctly.
