- 55 -Recording¢1 This can be set only when Intelligent Auto Mode is set. The icon changes depending on the typeof subject and brightness. (P31)¢2 The flash is activated twice. The subject should not move until the second flash isactivated. Interval until the second flash depends on the brightness of the subject.[Red-Eye Removal] (P96) on the [Rec] menu is set to [ON], [ ] appears on the flash icon.Item Description of settings[‡] ([Auto]) The flash is automatically activated when the recording conditionsmake it necessary.[ ] ([iAuto])¢1[ ]([Auto/Red-Eye])¢2The flash is automatically activated when the recording conditionsmake it necessary.It is activated once before the actual recording to reduce thered-eye phenomenon (eyes of the subject appearing red in thepicture) and then activated again for the actual recording.• Use this when you take pictures of people in low lightingconditions.[‰]([Forced Flash On])The flash is activated every time regardless of the recordingconditions.• Use this when your subject is back-lit or under fluorescentlight.[ ]([Slow Sync./Red-Eye])¢2If you take a picture with a dark background landscape, thisfeature will slow the shutter speed when the flash is activated sothat the dark background will become bright. Simultaneously, itreduces the red-eye phenomenon.• Use this when you take pictures of people in front of a darkbackground.[Œ]([Forced Flash Off])The flash is not activated in any recording conditions.• Use this when you take pictures in places where the use offlash is not permitted.