Panasonic DMP-BD10K Operating Instructions Manual

Also see for DMP-BD10 - Blu-Ray Disc Player: Operating instructions Operating instructions Additional information Service manual

Panasonic DMP-BD10K Operating Instructions Manual Manual pdf 23 page image

23RQT8745When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set onthe amplifier/receiver.Speaker presence and size ()Press [, , , ] to select the speaker icon () and press[ENTER].Press [, ] to select the setting and press [ENTER].Icon examples:Surround speaker (LS)pLarge: Select when thespeaker supportslow-frequency (under100 Hz) reproduction.pSmall: Select when the speaker does not support low-frequencyreproduction.In order to make an ideal listening environment, settings of speakersizes may be automatically adjusted.For example, if the subwoofer is set to “No”, the front speakers willautomatically be set to “Large”. (In this case, we recommendconnecting a speaker that can reproduce bass below 100 Hz.)Delay time ()(Effective when playing multi-channel audio)(Center, surround and surround back speakers only)For optimum listening with 7.1/5.1-channel sound, all the speakers,except for the subwoofer, should be the same distance from theseating position.If you have to place the center, surround and surround back speakerscloser to the seating position, adjust the delay time to make up for thedifference.If either distance or is less than , find the difference in therelevant table and change to the recommended setting.Press [, , , ] to select the delay time box () and press[ENTER].Press [, ] to select the setting and press [ENTER].Channel balance ()(Effective when playing multi-channel audio)This does not work when connected with HDMI terminals and “HDMIAudio Output” (➜ above, “ HDMI ” tab) is set to “On”.Select “Test” and press [ENTER].A test signal is output.Front (L)(Center(Front (R)(Surround (RS) Surround (LS)(Surround Back(LB) (Surround Back (RB)While listening to the test signal, press [ ] to adjust the volumeof each speakerFront speakers: 0.0 to U6.0 dBExcept for front speakers: 0.0 to U12.0 dBPress [ENTER]..The test signal stops.pNo signal is output for the subwoofer. To adjust its volume, playsomething, then return to this screen to adjust to suit your taste.To finish the speaker settingPress [ ] to select “Complete” and press [ENTER].Tabs Menus Options (Underlined items are the factory presets.)HDMI HDMI Video ModeSelect “On” when video is output from HDMI AV OUTterminal.pOn : [Note]:Video from COMPONENT VIDEO OUTterminal is output as “480i” if this is selected.pOffHDMI ResolutionYou can only select settings compatible with the connectedequipment. This setting normally does not need to bechanged. However if you are concerned about output picturequality, it may be improved by changing the setting.Still pictures play at a resolution equivalent to 480pregardless of the settings.pAuto: Automatically selects the output resolutionbest suited to the connected television(1080p, 1080i, 720p or 480p).p480pp720pp1080ip1080pHDMI RGB Output RangeEffective when connected to a device that only supports RGBoutput.pStandard :pEnhanced: When the black and white images are notdistinct.HDMI Audio OutputThis setting selects whether or not to output audio from HDMI.[Note]:If “On” is selected, audio output from the 7.1ch AUDIOOUT terminal will match the number of channels on theequipment connected with HDMI.pOn :pOff: When the TV is connected to this unit with anHDMI cable, and you are connected to anamplifier/receiver that does not support HDMI.Ctrl with HDMI pOn : When “On” is selected, you can operate otherEZ Sync HDAVI control compatible devices (➡ 18).pOff:Changing the speaker setting to suit your speakersmsmsLCompleteTestLSRSWRSdBdB dBdBdBdBdBdB msLB RB0.00.0 0.00.00.00.0 0.00.00.0 0.00.0CSubwooferFront (R)CenterFront (L)Complete(LS) Surround (RS) Surround backTest(RB)(LB)LS LSNoLarge Small LLSRSWCRSCRSLS LLBRRSSWCRBCRBRSLSLB LSApproximate room dimensionsCircle of constant primary listening distance: Actual speaker position: Ideal speaker position: Primary listeningdistance5.1ch speaker connection 7.1ch speaker connection Center speakerDifference SettingApprox. 34 cm (1 1e10 feet) 1.0 msApprox. 68 cm (2 1e5 feet) 2.0 msApprox. 102 cm (3 3e10 feet) 3.0 msApprox. 136 cm (4 2e5 feet) 4.0 msApprox. 170 cm (5 1e2 feet) 5.0 msSurround/Surround back speakersDifference SettingApprox. 170 cm (5 1e2 feet) 5.0 msApprox. 340 cm (11 feet) 10.0 msApprox. 510 cm (16 1e2 feet) 15.0 msSettings Changing the unit’s settingsSettings