Panasonic DMP-BD10K Operating Instructions Manual

Also see for DMP-BD10 - Blu-Ray Disc Player: Operating instructions Operating instructions Additional information Service manual

Panasonic DMP-BD10K Operating Instructions Manual Manual pdf 27 page image

27RQT8745MessagesThe following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup anduse.On the television PageOn the unit’s displayaThe messages are alternately displayed.Disc handlingClean discsWipe with a damp cloth and then wipe dry.Disc handling precautionspDo not attach labels or stickers to discs (This may cause discwarping, rendering it unusable).pDo not write on the label side with a ball-point pen or other writinginstrument.pDo not use record cleaning sprays, benzine, thinner, staticelectricity prevention liquids or any other solvent.pDo not use scratch-proof protectors or covers.pDo not use the following discs:– Discs with exposed adhesive from removed stickers or labels(rented discs etc).– Discs that are badly warped or cracked.–Irregularly shaped discs, such as heart shapes.MaintenanceClean this unit with a soft, dry clothpNever use alcohol, paint thinner or benzine to clean this unit.pBefore using chemically treated cloth, read the instructions thatcame with the cloth carefully.pCleaning of the lens is generally not necessary.pDo not use any lens cleaners as they may damage the unit.Cannot play. pYou inserted an incompatible disc (Discs recorded in PAL video, etc.). 4, 5Cannot display on this unit. pYou tried to play a non-compatible image. 5Copyrighted material. Audiowill not be output from HDMI.pShould you connect equipment that does not support HDCP the audio from the CPPMcopy protected DVD-Audio cannot be output from HDMI AV OUT terminal. Connect theaudio cable of the Audio/Video cable (Red, White), optical digital audio cable or coaxialcable to the corresponding terminals.8–10No disc pThe disc may be upside down. — pThe operation is prohibited by the unit or disc. —F99 pThe unit fails to operate properly. Press [¦/I POWER] on the main unit to switch the unit tostandby. Now press [¦/I POWER] on the main unit again to turn the unit on.—HDMI ONLYa pSome BD-Video discs can only be output with HDMI. —No PLAY pWhen there is a viewing restriction on a BD-Video or DVD-Video. 21No READ pThe disc is dirty or badly scratched. The unit cannot play. —PLEASE WAITa pDisplayed when the unit is started and turned off. This is not a malfunction.pThe unit is carrying out its recovery process. You cannot operate the unit while “PLEASEWAIT” is displayed.——SET (“t” stands for a number.)pThe remote control and main unit are using different codes. Change the code on theremote control.Press and hold [ENTER] and the indicated number button at thesame time for more than 2 seconds.11UNFORMATa pYou inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-RW (DVD-Video format).—UNSUPPORTa pYou have inserted a disc the unit cannot play. 4, 5U59 pThe unit is hot.The unit switches to standby for safety reasons. Wait for about 30 minutes until themessage disappears.Select a position with good ventilation when installing the unit. Do not block the coolingfan on the rear of the unit.—U71 pThe connected equipment is not HDMI compatible. —U72U73pThe HDMI connection acts unusually.–The connected equipment is not HDMI compatible.–Please use HDMI cables that have the HDMI logo (as shown on the cover).–The HDMI cable is damaged.—Hor F pThere is something unusual. (The service number displayed after H and F depends on theunit’s condition.)pCheck the unit using the troubleshooting guide. If the service number does notdisappear, do the following.1. Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.2. Press [¦/I POWER] to turn the power on. (The unit may be fixed.)If the service number does not disappear despite doing the above, request service fromthe dealer. Inform the dealer of the service number when requesting service.—24–26DRReference Messages / Disc handling / MaintenanceReference