Panasonic DMP-BDT100 Operating Instructions Manual

Also see for DMPBDT100 - 3D BLU-RAY DISC PLAYER: Operating instructions Operating instructions

Panasonic DMP-BDT100 Operating Instructions Manual Manual pdf 12 page image

Downloaded from www.vandenborre.be12VQT2U34STEP 4 : ConnectingAC mains lead≥ This unit consumes a small amount of AC power (“QuickStart”: “Off”, approx. 0.2 W) even when turned off. In theinterest of power conservation, if you will not be using thisunit for an extended period of time, it can be disconnected.STEP 5 : SettingAfter connecting your new player for the first time andpressing [Í], a screen for the basic settings will appear.PreparationTurn on the television and select the appropriate videoinput on the television.1 Press [Í].Setup screen appears.If this unit is connected to a Panasonic TV (VIERA)supporting HDAVI Control 2 or later via an HDMI cable,then the setting information on the TV is acquired by thisTV.2 Follow the on-screen instructions and makethe settings with [3, 4] and press [OK].“On-Screen Language”, “TV Aspect” and “Quick Start”are set. (> 29 – 31)After completing “Easy Setting”, you can perform “NetworkEasy Setting”.≥ You can perform this setup anytime by selecting “Easy Setting” in theSetup menu. (> 31)≥ You can also change these settings individually. (> 29 – 31)After completing “Easy Setting”, you can continue with“Network Easy Setting”.Select “Wired” or “Wireless” and press [OK].∫ “Wired” connectionFollow the on-screen instructions to make your connection settings.≥ When you experience problems (> 13)∫ “Wireless” connectionIf you select “Wireless” and “Wireless LAN Adaptor is notconnected.” is displayed, check that the Wireless LANAdaptor is fully inserted. Alternatively, disconnect andreconnect it. If there is still no change in the display, consultyour dealer for advice.Select “WPS (PUSH button)” or “Search foraccess point” and then follow the on-screeninstructions and make the settings.WPS (PUSH button):If your Wireless router (Access point)supports WPS (PUSH button), you caneasily perform the settings by pressingWPS button on it.WPS (Wi-Fi Protected Setup) is a standardthat facilitates settings relating to theconnection and security of wireless LANdevices.1 Press WPS button or corresponding button of Wirelessrouter (Access point) until the lamp starts flashing.≥ For details, refer to the operating instruction ofWireless router (Access point).2 Press [OK].Easy SettingAC mains lead(supplied)To a household mains socket(AC 220 to 240 V, 50 Hz)Network Easy SettingOKRETURNNetwork Easy Setting (Connection Test)WiredWirelessSelect a connection mode.Current setting : WiredLAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Connect the Wireless LAN Adaptor (DY-WL10) to the USBport and select “Wireless”.Access Point Connection SettingSelect a connection method for access toWireless LAN.Please refer to the operating instructions ofthe access point about connection methods.WPS (PUSH button)Search for access point* 1e.g.(12)