Panasonic DMP-BDT100 Operating Instructions Manual

Also see for DMPBDT100 - 3D BLU-RAY DISC PLAYER: Operating instructions Operating instructions

Panasonic DMP-BDT100 Operating Instructions Manual Manual pdf 31 page image

Downloaded from www.vandenborre.be31VQT2U34ENGLISHNetwork Easy Setting (> 12)Network SettingsPerform network-related settings individually.Press [OK] to show the following settings. Remote ControlChange the remote control code if other Panasonic productsreact to this remote control.Quick StartSpeed of startup from standby mode is increased.≥ Internal control unit will be powered when it is set to “On”so compared to when the setting is “Off” the following willoccur.– Idle power consumption will increase. (about the powerconsumption > 40)Easy SettingYou can execute basic settings (“On-Screen Language”, “TVAspect”, “Quick Start”)Default SettingsThis returns all values in the Setup menu and the Playbackmenu, except for “Remote Control”, “On-Screen Language”,“LAN Connection Mode”, “Access Point Connection Setting”,“IP Address / DNS Settings”, “Proxy Server Settings”,“Lock”, “DVD-Video Ratings” and “BD-Video Ratings” etc. tothe default settings.DivX Registration (> 19)You need this registration code to purchase and play DivXVideo-on-Demand (VOD) content.System InformationDisplay firmware version of this unit and wireless LANmodule of your Wireless LAN Adaptor.Firmware Update (> 14)Press [OK] to show the following settings.NetworkLAN Connection ModeSelect connection method.Access Point Connection SettingThis allows the Wireless router (Access point) andconnection settings to be set and the current connectionsettings and connection state to be checked when awireless connection is used.Connection SettingThe Wireless router (Access point) connection wizardwill be displayed.Double Speed Mode Setting (2.4GHz)When a 2.4 GHz wireless format is used, this settingsets the connection speed.≥ If you connect using the “Double Speed Mode(40MHz)”, two channels use the same frequencyband, and there is consequently a greater risk ofreception interference. This can cause the connectionspeed to drop or the connection to become unstable.IP Address / DNS SettingsThis is for checking the state of the network connectionand setting the IP address and DNS-related.Press [OK] to show the respective setting.≥ “Connection Speed Setting” is enabled only when“Connection Speed Auto-Config” is turned “Off”.Proxy Server SettingsThis is for checking the state of connection with the Proxyserver and performing settings.Press [OK] to show the respective setting.Internet Content Settings (> 22) (VIERACAST)Press [OK] to show the following settings.LockYou can restrict the usage of VIERA CAST.≥ Follow the on-screen instructions. Enter the 4-digit passwordwith the number buttons when the password screen is shown.Audio Auto Gain ControlVolume that is different depending on the contents is adjustedautomatically to the standard volume while using the VIERACAST.≥ Depending on contents, this function effect will not work.≥ Select “Off” when the audio is warped.Time ZoneBy selecting the time zone, it is possible to set the unit’stime to match your location.≥ Some VIERA CAST contents require the time zone tobe set. Set the time zone if necessary.Summer Time≥ Select “On” when using Daylight Saving time.MAC AddressDisplays the MAC address of this unit.GeneralAutomatic Update CheckWhen this equipment remains connected to the Internet, itwill check for the latest firmware version when it is turnedon and you can update it if necessary.Update NowYou can update the firmware manually if a firmwareupdate is available.(31)