Panasonic DMP-BDT350 Operating Manual (English, Spanish) Operating Instructions Manual

Also see for Spanish): Installation and operating insctructions Installation and operating instructions Operating instructions Installation and operating instructions Installation and operating instructions

Panasonic DMP-BDT350 Operating Manual (English, Spanish) Operating Instructions Manual Manual pdf 15 page image

15VQT2J87(ENG)Connections & SettingsAfter completing “Easy Setting”, you can continuously perform“Network Easy Setting”.1 Select “Wired” or “Wireless” and press[OK].If “Wireless LAN Adaptor is not connected.” is displayed,check that the Wireless LAN Adaptor is fully inserted.Alternatively, disconnect and reconnect it. If there is still nochange in the display, consult your dealer.2 Follow the on-screen instructions andmake the settings with [3, 4, 2, 1] andpress [OK].For wireless LAN connection:If you are using a Wireless router (Access point) that supportsWPS, you can easily perform the settings by selecting “WPS(PUSH button method)”.Otherwise, perform the settings by selecting “Search foraccess point” or “Manual setting” in “Other methods”.≥ WPS (Wi-Fi Protected Setup) is a function that facilitatessettings relating to the connection and security of wirelessLAN devices. To see whether your Wireless router (Accesspoint) supports WPS, check the Wireless router operatinginstructions.Access Point Connection SettingNetwork Easy SettingOKRETURNNetwork Easy Setting (Connection Test)WiredWirelessSelect a connection mode.Current setting : WiredLAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Connect the Wireless LAN Adaptor (DY-WL10) to the USBport and select “Wireless”.OKRETURNAccess Point Connection SettingSelect a connection method to use with an access pointof Wireless LAN.Please refer to the operating instructions of the accesspoint about connection methods.WPS (PUSH button method)Other methodspWPS (PIN code method)Search for access pointManual settingWhen you experienceproblems with settingsDisplay Check the followingA conflict with anotherdevice occurred.≥ Please wait a few moments,and then try again.A time out error occurred.≥ Setting of the Wireless router(Access point) for MAC Addressetc.≥ The signal may be weak. Usingthe included USB extensioncable, adjust the position of theWireless LAN Adaptor. Do notuse any other USB extensioncables except the supplied one.≥ The SSID and the encryptionkey of the Wireless router(Access point).≥ Please wait a few moments,and then try again.An authentication error ora time out error occurred.A device error occurred.≥ Connection of Wireless LANAdaptorIf there is no improvement insymptom, contact our CustomerService Center.OKAccess Point Connection SettingFailed to connect to the access point.A conflict with another device occurred.Do you want to configure Access Point ConnectionSetting again ?Yes No