Panasonic DMP-BDT350 Operating Manual (English, Spanish) Operating Instructions Manual

Also see for Spanish): Installation and operating insctructions Installation and operating instructions Operating instructions Installation and operating instructions Installation and operating instructions

Panasonic DMP-BDT350 Operating Manual (English, Spanish) Operating Instructions Manual Manual pdf 17 page image

17VQT2J87(ENG)Connections & SettingsOccasionally, Panasonic may release updated firmware forthis unit that may add or improve the way a feature operates.These updates are available free of charge.This unit is capable of checking the firmware automaticallywhen connected to the Internet via a broadband connection.When a new firmware version is available, the followingscreen is displayed.DO NOT DISCONNECT the unit from the AC power orperform any operation while the update takes place.After the firmware is installed, “FINISH” will be displayed onthe unit’s display. Unit will restart and the following screen willbe displayed.≥ You can perform updates anytime by selecting “Firmware Update” in theSetup menu. (> 33)≥ If downloading on this unit fails or this unit is not connected to theInternet, then you can download the latest firmware from thefollowing website and burn it to a CD-R to update the firmware.http://panasonic.jp/support/global/cs/(This site is in English only.)To show the firmware version on this unit. (>33, “SystemInformation”)≥ Downloading will require several minutes. It may take longer or theInt ernet may not be connected depending on the connection environment.≥ If you do not want to check for the latest firmware version, set “AutomaticUpdate Check” to “Off”. (> 33)STEP 6 :Reprogramming theremote controlChange “Remote Control Code” (> 33) on the main unit andthe remote control (the two must match) if you place otherPanasonic products close together and it responds to thisremote control.You can operate the TV or amplifier/receiver using the unit’sremote control.1 For televisionsInput the code (> 42) with the numberbuttons while pressing [Í TV POWER].For amplifiers/receiversInput the code (> 42) with the numberbuttons while pressing[RECEIVER j VOL].e.g., 0001: [0] B [0] B [0] B [1]2 Test by turning on the television oradjusting the volume of the amplifier/receiver.≥ If your television or amplifier/receiver brand has more than one codelisted, select the one that allows correct operation.Firmware updatesFirmware UpdateLatest Online Version: x.xxCurrent Installed Version: x.xxDo you want to start firmware update?For the update information, please visit thefollowing website:http://panasonic.net/support/RETURNOKYes NoThe firmware was updated.Current Installed Version : x.xxRETURNOKFor other Panasonic productsFor TV or amplifier/receiver