Panasonic DMP-BDT700 Operating Instructions Manual

Also see for DMP-BDT700: Basic operating instructions

Panasonic DMP-BDT700 Operating Instructions Manual Manual pdf 10 page image

10 SQT0280Connections and settingsConnecting to a TVConnect the AC mains lead after making all connections.≥ Before making any connections, we recommend that you temporarily disconnect all the units from ACpower.≥ Use HDMI AV OUT MAIN terminal with the supplied HDMI cable.≥ Insert the AC mains lead up to A, a point just before the round hole.≥ To enjoy 4K output, you need to connect this unit to a 4K compatible TV.≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.It is recommended that you use Panasonic’s HDMI cable.A High Speed HDMI-compliant cable that supports 18 Gbps is supplied with this unit.Part number : K1HY19YY0032≥ To enjoy image in 4K (50p/60p), set “4K ( 50p/60p ) Output” to “Automatic”. (> 28)≥ In case problems occur for the playback of content such as no picture or picture distortion, check theHDMI cable, related connections and the compatibility of TV video input.To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected device.≥ This unit consumes a small amount of AC power (> 39) even when turned off in standby mode. Forthe purpose of energy conservation, the unit should be disconnected if you will not be using it forextended period of time.HDMI IN HDMI cable (supplied)AC mains lead(supplied)To a household mainssocket