Panasonic DMP-BDT700 Operating Instructions Manual

Also see for DMP-BDT700: Basic operating instructions

Panasonic DMP-BDT700 Operating Instructions Manual Manual pdf 28 page image

28 SQT0280Setup menuChange the unit’s settings if necessary. Thesettings remain intact even if you switch the unitto standby.Some items are common to the Option menu. Youcan get the same effect with both menus.1 Press [HOME].2 Select “Setup”.3 Select “Player Settings”.4 Select an item and change the settings.To exit the screenPress [HOME].∫ HDMI OutputPress [OK] to show the following settings:¾HDMI Video FormatThe items supported by the connected devicesare indicated on the screen as “¢”. When anyitem without “¢” is selected, the images may bedistorted.≥ If “Automatic” is selected, the best suitedoutput resolution to the connected TV isautomatically selected.≥ To enjoy high-definition video up-converted to1080p, you need to connect the unit directlyto 1080p compatible HDTV (High DefinitionTV). If this unit is connected to an HDTVthrough other equipment, the other equipmentmust also be 1080p compatible.¾4K ( 50p/60p ) OutputThis unit automatically chooses to outputimages in 4K* 1 (50p/60p) when connected to a4K (50p or 60p) compatible TV.≥ This item is available only when “HDMI VideoFormat” is set to “Automatic”.≥ Images will not be output correctly with anHDMI cable that does not support 18 Gbps.(The supplied HDMI cable supports 18 Gbps.)≥ If “Automatic” is selected, “HDMI(SUB)Output Mode” will be set to “V.OFF(VideoOff)”.¾24p OutputMovies and other material recorded at 24p*2 areoutput at 24p.≥ When this unit is connected to TV compatiblewith 4K/24p and “HDMI Video Format” is setto “Automatic”, images will be output in 4K/24p.≥ When this unit is connected to a TVcompatible with 1080/24p and “HDMI VideoFormat” is set to “Automatic”, “1080i” or“1080p”, images will be output in 1080/24p.≥ When BD-Video images other than 24p areplayed, images are output at 60p.¾HDMI Colour ModeThis setting is for selecting colour-spaceconversion of the image signal.¾Deep Colour OutputThis setting is for selecting whether to use DeepColour Output when a TV that supports DeepColour is connected.¾Contents Type FlagDepending on the playback content, the TV willoutput adjusting to the optimal method when aTV that supports this function is connected.¾HDMI(SUB) Output ModeSet to output the video from the HDMI AV OUTSUB terminal or not.PictureOKRETURNHDMI OutputSeamless PlayStill ModeOnAutomaticPlayer SettingsSystemRatingsNetworkLanguage3DSoundPicture