14 SQT0280After connecting your new player for the first timeand pressing [Í], the basic settings screen willappear.PreparationTurn on the TV and select the appropriatevideo input.1 Press [Í].Setup screen appears.2 Follow the on-screen instructions tocontinue with the settings.≥ If your wireless network is encrypted,Encryption Key input screen will be displayed.Input the encryption key of your network.SettingsThe following settings can be performed anytimein the Setup menu. (> 31, 32)Easy SettingsEasy Network SettingAfter completing “Easy Settings”, you can perform“Easy Network Setting”.Select “Wired” or “Wireless” and press [OK].∫ “Wired” connectionFollow the on-screen instructions to apply yourconnection settings.∫ “Wireless” connectionBefore beginning wireless connection setup≥ Obtain your network name (SSID* 1).≥ If your wireless connection is encrypted,please be sure that you know yourencryption key.Select “Search for wireless network” or “WPS(PUSH button)”, then follow the on-screeninstructions and apply the settings.Easy Network SettingWiredWirelessSelect a connection mode.OKRETURNWPS (PUSH button):If your wireless router supportsWPS (PUSH button), you caneasily perform the settings bypressing WPS button on it.WPS (Wi-Fi Protected Setup TM) is a standard thatfacilitates settings relating to the connection andsecurity of wireless LAN devices.1 Press WPS button or corresponding button ofthe wireless router until the lamp startsflashing.≥ For details, refer to the operating instructionof the wireless router.2 Select “Start”.Search for wireless network:≥ When you select “Search for wireless network”,the available wireless networks will bedisplayed. Select your network name.– If your network name is not displayed, searchagain by pressing the red button on theremote control.– Stealth SSID will not be displayed when youselect “Search for wireless network”. Entermanually by using “Manual setting”.(Press [HOME] > select “Setup” > select“Player Settings” > select “Network” > select“Network Settings” > select “WirelessSettings” > select “Connection Setting” >select “Manual setting”)Wireless SettingsSelect a connection method to wireless access point.Please refer to the operating instructions of your wirelessaccess point about connection methods.Search for wireless networkWPS (PUSH button)* 2e.g.