Convenient functionsSQT0351100Other operationsWhen the image does not match the screen sizeof the TV, you can enlarge the image to fill thescreen.1 Press [OPTION].2 Select “Playback Settings” in “PlaybackMenu”, then press [OK].3 Select “Aspect” in “Basic Operation”, thenpress [OK].4 Select the item, then press [OK].• This function does not work when watching 3D programmeand playing back 3D title or 3D photo.• It may also be adjusted using the screen mode of the TV,etc.• The screen mode is switched to “Normal” in the followingsituations:- when you change the channel- when you start or end the playback of a title- when you switch the unit on or to standby mode.• [BD-V] [DVD-V] “Side cut” does not have any effect.• When “TV Aspect” (> 90) is set to “Pan & Scan” or“Letterbox”, the “Zoom” effect is disabled.The HOLD function deactivates all buttons on theunit and remote control.Press and hold [OK] and [RETURN ]simultaneously until “X HOLD” appears on thefront panel display.To cancel the HOLD functionPress and hold [OK] and [RETURN ]simultaneously until “X HOLD” disappears.Switching the aspect ratio of thescreenNormal:Normal outputSide cut:The black bars on the right and left sides ofthe 16:9 image disappear and the image isenlarged.Zoom:The black bars on the top and bottom sidesof the 4:3 image disappear and the image isenlarged.HOLD function
