Panasonic DMR-BCT74 Operating Instructions Manual

Contents

Panasonic DMR-BCT74 Operating Instructions Manual Manual pdf 21 page image

Getting startedSQT0351 211 Turn on the TV, then select the appropriateAV input to suit the connections to this unit.3 Select language, then press [OK].4 Select country, then press [OK].5 Select the channel number allocation, thenpress [OK].• Normally set to “Operator’s ChannelNumber ( LCN )”.6 Select “Start Auto Setup”, then press [OK].9 Set Quick Start to “On”, “Off” or “TimerSetting for Quick Start”, then press [OK].10Select the item to match the type of TVconnected.For details, refer to “TV Aspect”. (> 90)When “Easy Setting has been completed.”appears, Easy Setting is complete.• Select “Yes” to proceed to “Easy NetworkSetting”. (> 22)• Select “No” to finish the Easy Setting.You need to set “Preferred Language” aftercompleting “Easy Setting” or “Easy NetworkSetting”.1 Press [FUNCTION MENU]. (> 20)2 Select “Basic Settings” in “Setup”, then press[OK].3 Select “Preferred Language” in “DVB Tuning”,then press [OK].4 Refer to page 85, “Preferred Language”.Easy Setting2 Press [Í] on the remote control or [Í/I] onthis unit.• The Easy Setting will start at the initialpower on.• FrequencyAutoThe preset frequency will beautomatically used.ManualEnter the frequency specified by yourcable provider with number buttons.• Network IDAutoThe preset Network ID will beautomatically used.ManualEnter the Network ID specified by yourcable provider with number buttons.• Frequency and Network ID settings may benecessary depending on the cable provider. Fordetails, consult the cable provider.7 Auto Setup will start automatically.(This operation may take some time.)e.g.,When tuning is completed, press [OK].Auto SetupProgressThis will take about 3 minutes.No. Channel Name Type QualityFree TV: 0 Pay TV: 0 Radio: 0Searching0% 100%8 Clock will be set automatically.If the clock setting screen appears, set thetime manually (> 94, Clock).• OnIt is possible to start quickly from standbymode.• OffPower consumption in standby mode isminimised. (> 110)However, startup time from standby modewill be longer.• Timer Setting for Quick Start“Quick Start” is activated when the set timecomes.Preferred Language