Getting startedSQT035122SettingsTo stop partwayPress [RETURN ].To restart setup1 Press [FUNCTION MENU]. (> 20)2 Select “Basic Settings” in “Setup”, then press[OK].3 Select “Auto Setup” in “DVB Tuning”, thenpress [OK].4 Select “Yes”, then press [OK].• If you are asked to select the auto setupmethod, refer to “Auto Setup”. (> 84)To confirm that channels have been tunedcorrectlyRefer to “Using Channel List”. (> 26)• If tuning is cancelled partway through, it may not bepossible to receive the channels. Restart setup again.After completing “Easy Setting”, you can continuewith “Easy Network Setting”.1 Select “Wired” or “Wireless”, then press[OK].3 When “Easy Network Setting is finished.”appears.Press [OK].Easy Network Setting2 Follow the on-screen instructions and makethe following confirmation and settings.“Wired” connection:- Home Network Connection Check- Home Network function- Remote Viewing and Recording- Internet Connection Test“Wireless” connection:• Before beginning wireless connectionsetup obtain your Network name (SSID).An SSID (Service Set IDentification) is aname used by wireless LAN to identify aparticular network. Transmission ispossible if the SSID matches for bothdevices.- Wireless Connection Check- Home Network Connection Check- Home Network function- Remote Viewing and Recording- Internet Connection TestOKRETURNEasy Network SettingSettings and tests for connection requiredfor home network and the Internet will beconducted.First, please select a connection mode.LAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Select “Wireless”.Current setting : WiredWiredWireless
