TroubleshootingSQT0139 97No sound.Distorted sound.• Check the connections. (> 14)• Check the settings of the connected TV, etc.• Select the audio with “Multi Audio”. (> 26, 42)• To output audio from a device connected with anHDMI cable, set “HDMI Audio Output” to “On”.(> 76, 84)Cannot change audio channel.• You cannot change the audio channel if “DigitalAudio Output” is set to “Bitstream” (> 82)Cannot record.Cannot copy.• Some broadcasts are copyright protected.• You cannot record to the disc by pressing the[REC ¥] or timer recording.• The disc is protected. (> 89)• [DVD-R] [DVD-RW] [+R] [+RW] Since it will copy toHDD temporarily, copying is not possible if thereis insufficient available capacity on the HDD.• [DVD-R] [DVD-RW] [+R] [+RW] Copying or editingmay not be possible on these discs afterejecting and loading the disc or switching theunit on or to standby mode for approximately30 times after being copied to.• This unit cannot record/copy NTSC signals todiscs that already have PAL signal recordings.The timer recording programmed via NetworkService does not work properly.• Timer recording programmed via NetworkService will be recorded with the sameconditions as those of manual timer recording,and some functions such as “Guide Link” (> 31)does not work.SoundRecording, timer recording andcopyingTimer recording does not work properly.• Failed timer recordings are displayed in greywith on the Timer Recording screen. (> 35)When you programme a timer recording, checkthe screen icons. If “!” is displayed, this timerprogramme may not be recorded because:- there is not enough space left.- the number of possible titles has reached itsmaximum.- programmes are deactivated, etc.• Because the actual broadcast time may bedifferent from the time displayed on the TVGuide, we recommend you set the start timeearlier and the end time later by some minutes,up to a maximum of 10 minutes.