Panasonic DMR-E20 Operating Instructions Manual

Also see for DMRE20 - DVD VIDEO RECORDER: Operating instructions Operating instructions

Contents

Panasonic DMR-E20 Operating Instructions Manual Manual pdf 15 page image

15Video Plus+ Codes for Satellite Receivers/Cable TVFor the United Kingdom:This unit is not designed to control (switch on or change channel) your satellite receiver or CableTV box, however, it can be taught to recognise Video Plus+ Codes for Satellite stations. TheSatellite receiver or Cable TV box must be switched on and the correct station selected. Somereceivers have their own timer facility for this purpose. Please refer to your Satellite Receiver/Cable TV box instructions for use of such timer facilities.For your unit to recognise the Video Plus+ Codes for each satellite station, you must teach yourunit which channel or AV input to record from for the first time. Otherwise when setting a VideoPlus+ recording, the [ss] symbol will appear in the channel position indicating that the unit doesnot know which channel position to set. Once you have set the channel/AV input once the unitwill remember it whenever you use a Video Plus+ Code for the station again.Preparation≥Turn on the television.≥Switch [DVD, TV] to “TV”.1 Turn on the TV and the unit. Select video playback channel on the TV.2 Press the SV/V+ button.3 Enter a Video Plus+ Code from a Satellite TV Guidefor a satellite channel, e.g. Sky 1 using the Numericbuttons. If you make a mistake, use the joystick [2222]to go back.4 Press [ENTER]. [ssssssss] will appear instead of achannel number/AV input.5 Use the joystick [3, 4, 2, 1] to select the channelor AV input that is to be used for recording from thesatellite channel.6 Press [ENTER] to memorise the setting. The unitwill now automatically set the programme positionor AV input correctly when a Video Plus+ recordingis set for this satellite station in the future.7 Use the joystick [3333] to select the programme thatyou have just set. Now press [CANCEL] to delete itfrom the timer recording list. It is no longer needed.8 Repeat steps 2ssss7 above until you have set anddeleted dummy timer recordings for each of the satellite stations that youwill make Video Plus+ recordings from.9 Press [RETURN] when you have finished.TVTV/AVPROG / CHECKTOP WINDOWTV/TEXTSTOPSV/V+RECTIME SLIPAV LINKSETUPAUDIOREC MODE CANCELINPUTSELECTMANUALSKIPLASTMARKERDIRECTTV RECTIMERREC1 2 34 5 67 8 90PAUSE PLAYSTATUSRETURNVOLOPEN/CLOSETCERIDROTAGIVANTOPMENUMENUDISPLAYTSILYALPENTERTVDVDTV ASPECTFRAMESKIP SLOW/SEARCHÁ2/3·4·5·6·7793