Panasonic DMR-E20 Operating Instructions Manual

Also see for DMRE20 - DVD VIDEO RECORDER: Operating instructions Operating instructions

Contents

Panasonic DMR-E20 Operating Instructions Manual Manual pdf 38 page image

3813TVTV/AVPROG / CHECKTOP WINDOWTV/TEXTSTOPSV/V+RECTIME SLIPAV LINKSETUPAUDIOREC MODE CANCELINPUTSELECTMANUALSKIPLASTMARKERDIRECTTV RECTIMERREC1 2 34 5 67 8 90PAUSE PLAYSTATUSRETURNVOLOPEN/CLOSETCERIDROTAGIVANTOPMENUMENUDISPLAYTSILYALPENTERTVDVDTV ASPECTFRAMESKIP SLOW/SEARCHÁ3 11/Recording from a video cassette playerWhen connected to non-DV equipment[RAM] [DVD-R]You can record audio and video being played on a video cassette player or video cameraconnected to the input terminals.Preparation≥Before connecting any cables, first make sure that the power for both units is off.Then after connecting any cable, turn on the both units.≥Connect the other equipment to this unit’s input terminals (page 73).≥Switch [DVD, TV] to “DVD”.≥Insert a disc that can be recorded on.≥Select the recording mode, XP, SP, LP, or EP (page 26).1 While stoppedPress [W, X] or [INPUT SELECT] to select the input channel for theequipment you have connected.≥Select AV1, AV2, AV3 or AV4.2 Start play on the other equipment.3 Press [¥, REC] at the point you want to start recording.When connected to DV equipment[RAM] [DVD-R]You can record audio and video being played on a DV equipment connected to the inputterminals.Preparation≥Before connecting any cables, first make sure that the power for both units is off.Then after connecting any cable, turn on the both units.≥Connect the other equipment to this unit’s input terminals (page 69).≥Use a DV cable to connect the equipment.≥Switch [DVD, TV] to “DVD”.≥Insert a disc that can be recorded on.≥Select the recording mode, XP, SP, LP, or EP (page 26).1 While stoppedPress [W, X] or [INPUT SELECT] to select the input channel for theequipment you have connected.≥Select DV.2 Start play on the other equipment.3 Press [¥, REC] at the point you want to start recording.For your referenceWe recommend connecting one piece of DV equipment at a time.When you have selected “AV3”