Panasonic DMR-E20K Operating Instructions Manual

Also see for Diga DMR-ES20: Operating instructions Setup guide Operating instructions Setup guide

RQT815225 Playing backOnly when you have selected “480p” in “TV Type” (Ô page 14).Position1 (Standard) - 5: The higher the setting the lower the screen moves.FUNCTIONS window andStatus messagesBy using the FUNCTIONS window you may access the mainfunctions quickly and easily.1 While stoppedPress [FUNCTIONS].Functions displayed depend on the type of disc.2 Press [e, r] to select an item andpress [ENTER].• If you select “Other Functions”, press [e, r] to select anitem and press [ENTER].To exit the FUNCTIONS windowPress [FUNCTIONS].Status messages appear on the television during operation to showthe condition of the unit.Press [STATUS].The display changes each time you press the button.Video menu–Change picture qualityPictureTo select the picture mode• Normal: Default setting• Cinema: Mellows moviesMPEG-DNRReduces noise and picture degradation.On←→OffProgressive (Ô page 36)Select “On” to enable progressive output.• Select “Off” if the picture is stretched horizontally.• When progressive output is on, closed captions cannot bedisplayed.Transfer (When “Progressive” is set to “On”.)Select the method of conversion for progressive output to suitthe type of material being played (Ô page 36, Film and video).• Auto1 (normal):Detects 24 frame-per-second film content andappropriately converts it.• Auto2: Select when using Auto1, and the video content isdistorted.Line-in NR (Only when IN1 or IN2 is selected.)Reduces video tape noise while dubbing.Depending on the software, jittering may occur.• Off: Noise reduction is off. Select when you want to recordinput as is.• On: Noise reduction works for any video input.Audio menu–Change sound effectV.S.S.(Dolby Digital, 2-channel or over only)Enjoy a surround-like effect if you are using two front speakersonly.• Turn V.S.S. off if it causes distortion.• V.S.S. does not work for SAP recordings.Dialog Enhancer(Dolby Digital, 3-channel or over only, including a center channel)The volume of the center channel is raised to make dialogeasier to hear.Other menu–Change the displaypositionRAM -R -RW(VR)-RW(V) +R DVD-VRAM -R -RW(VR)-RW(V) +R DVD-VRAM -R -RW(VR)-RW(V) +R DVD-VRAM -RW(VR)-RW(V) +R DVD-VFUNCTIONS windowStatus messagesFUNCTIONS DOCUMENTARYCartridge Protection OffDisc Protection OffOffDVDDVD-RAMPlaybackSchedule SCHEDULEENTERVCR Plus+DIRECT NAVIGATOROther Functions1:45 SP12/24 6:34 PMT12 0:01.23 SP gggT12 0:12.34 SPRec.StereoDVD-RAMPlayRemainType of discRecording or play status/inputchannelAudio typeDate and timeAvailable recording timeand recording modeTitle number and elapsedtime during recording/Recording modeTitle number and elapsedtime during play/Recording modeNo display