Panasonic DMR-E20K Operating Instructions Manual

Also see for DMR-E20K: Operating instructions

Contents

Panasonic DMR-E20K Operating Instructions Manual Manual pdf 86 page image

86RQT6035Initial settingsEntering a passwordYou can limit play of DVDs unsuitable for some audiences. Play andchanges to the settings are not possible unless you enter apassword.When setting ratingsThe password screen is shown when you select levels 0 to 7.1. Input a 4-digit password with the numbered buttons.³If you enter a wrong number, press [CANCEL] to erase it beforeyou press [ENTER].Do not forget your password.2. Press [ENTER].3. Press [ENTER].The password is entered and the unit is locked.Changing the unit’s settingsNow, when you insert a DVD-Video that exceeds the ratingslimit you set, a message appears on the television.Follow the on-screen instructions.Digital outputChange these settings when you have connected equipmentthrough this unit’s OPTICAL DIGITAL AUDIO OUT terminal.PCM Down ConversionOff (factory setting):When you have used audio cables to connect the unit to otherequipment (analog connection [C] ➡ page 78).On:When you have used an optical digital cable to connect the unit toother equipment (digital connection [B] ➡ page 78). Output is limitedto 48 kHz/16 bit.Output of audio with a sampling frequency of 96 kHzAudio is output as follows in accordance with the connections andsettings you make.ConnectionSettingOffOn[C](analog)Output as 96 kHzConverted and outputas 48 kHz[B](digital)No output¤1Converted and outputas 48 kHz/16 bit¤1 96 kHz audio is output if the DVD is unprotected, but the connect-ed equipment must be able to handle such signals in order to playthem.Dolby DigitalBitstream (Factory preset):When you have connected a unit with a built-in Dolby Digitaldecoder.PCM:When you have connected a unit that doesn’t have a built-in DolbyDigital decoder.¤2DTSOff (Factory preset):When you have connected a unit that doesn’t have a built-in DTSdecoder.¤2Bitstream:When you have connected a unit with a built-in DTS decoder.¤2 Set “Dolby Digital” to “PCM” and “DTS” to “Off” if the other equip-ment doesn’t have decoders. Incorrect settings can cause noiseto be output which can be harmful to your ears and speakers, andaudio will not be recorded properly to digital recording equipment.ACTIONNo.0 - 9RETURNRatingsEnter a 4 digit password,then press ENTERPassword ✱✱✱✱ACTION RatingsUnlock RecorderChange PasswordChange LevelTemporary UnlockRETURNENTERSELECTWhen changing ratingsThe password screen is shown when you select “Ratings”.1. Input your 4-digit password with the numbered buttons and press[ENTER].Unlock Recorder: To unlock the unit and return the rating to 8Change Password: To change your passwordChange Level: To change the rating levelTemporary Unlock: To temporarily unlock the unit (the unitlocks again if you switch it to standby oropen the disc tray)2. Select the item with the joystick [3, 4] and press [ENTER].Actual screens depend on the operation. Follow the on-screeninstructions.!?