Panasonic DMR-E500HS Operating Instructions Manual

Also see for DMR-E500HS: Firmware instructions Operating instructions

Contents

Panasonic DMR-E500HS Operating Instructions Manual Manual pdf 14 page image

14RQT7394Getting startedSTEP 3 Set up to match your television and remote controlYou do not have to change the setting when connected to a 4:3standard aspect television that is not compatible with progressiveoutput (➡ page 69).1 Press [SETUP].2 Press [3, 4] to select “TV Screen”and press [1].3 Press [3, 4] to select “TV Type” andpress [ENTER].≥Aspect 4:3/Aspect 16:9:≥480p/480i:Select “480p” if the television is compatible withprogressive output.4 Press [3, 4] to select the item andpress [ENTER].You can configure the remote control TV operation buttons to turnthe television on/off, change the television input mode, select thetelevision channel and change the television volume.Point the remote control at the televisionWhile pressing [Í POWER TV], enter thecode with the numbered buttons.e.g., 01: [0] ➡ [1]Manufacturer and Code No.Test by turning on the television and changing channels. Repeatthe procedure until you find the code that allows correct operation.≥If your television brand is not listed or if the code listed for yourtelevision does not allow control of your television, this remotecontrol is not compatible with your television.Change the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.Use “1”, the factory set code, under normal circumstances.1 Press [SETUP].2 Press [3, 4] to select “Set Up” andpress [1].3 Press [3, 4] to select “RemoteControl Code” and press [ENTER].4 Press [3, 4] to select the code (1, 2,or 3) and press [ENTER].5 To change the code on the remote controlWhile pressing [ENTER], press andhold the numbered button ([1], [2] or[3]) for more than 2 seconds.6 Press [ENTER].∫ When the following indicator appears on theunit’s displayChange the code on the remote control to match the main unit’s(➡ step 5).To exit the screenPress [SETUP].To return to the previous screenPress [RETURN].Selecting television type4:3 standard aspecttelevision16:9 widescreentelevisionPOWERVOLUMECHINPUT SELECTDVD POWER TVTV/VIDEO1HDD SD/PCDVD2 34 5 67 809CM SKIPAUDIOPAGECHCANCEL VCR Plus+SKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCHAPTERSETUPInfoPROG/CHECK TV GUIDEREC MODEERASE RECSTATUSTIME SLIPDISPLAYDUBBING3,4,2,1ENTERRETURNSETUPNumberedbuttonsTV operationbuttonsSETUPSet UpDiscVideoAudioNetworkDisplayTV TypeAspect 4:3 & 480iAspect 4:3 & 480pTV ScreenChannelAspect 16:9 & 480pAspect 16:9 & 480i4:3 16:9Television operationPanasonicNationalQUASAR01, 02PHILIPS (RC-5) 03RCA 05SAMSUNG 14, 18, 19FISHER 10 SANYO 10GE 05 SHARP 06, 07GOLDSTAR 15, 16, 17 SONY 08HITACHI 12 SYLVANIA 03JVC 11 THOMSON 05LG 15, 16, 17 TOSHIBA 09MAGNAVOX 03 ZENITH 04MITSUBISHI 13When other Panasonic productsrespond to this remote controlSETUPDiscVideoRemote Control CodeChannelSet UpPress “±” and “ENTER” togetherfor more than 2 seconds on the remote.The unit’s remote control code