Panasonic DMR-E500HS Operating Instructions Manual

Also see for DMR-E500HS: Firmware instructions Operating instructions

Contents

Panasonic DMR-E500HS Operating Instructions Manual Manual pdf 34 page image

34RQT7394Playing backPlaying still picturesOnly insert or remove the SD/PC card after turning the unit off.When the card indicator (“SD” or “PC”) on the unit’s display isflashing, the card is being read from or written to. Do not turn off theunit or remove the card. Such action may result in malfunction orloss of the card’s contents.∫ SD card slot≥You can use SD Memory Cards with capacities from 8 MB to 1 GB(➡ page 21).∫ PC card slotRegarding still pictures (JPEG, TIFF)≥Compatible formats:DCF§ compliant (Content recorded on adigital camera etc.)§ Design rule for Camera File system: unified standardestablished by Japan Electronics and Information TechnologyIndustries Association (JEITA).≥File format: JPEG, TIFF (non-compressed RGB chunky format)≥Number of pixels:34k34 to 6144k4096(Sub sampling is 4:2:2 or 4:2:0)≥This unit can handle a maximum of 3000 files and 300 folders(including higher folders).≥Operation may take time to complete when playing TIFF formatstill pictures, or when there are many files and/or folders, somefiles may not display or be playable.≥MOTION JPEG is not supported.POWERVOLUMECHINPUT SELECTDVD POWER TVTV/VIDEO1HDD SD/PCDVD2 34 5 67 809CM SKIPAUDIOPAGECHCANCEL VCR Plus+SKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCHAPTERSETUPInfoPROG/CHECK TV GUIDEREC MODEERASE RECSTATUSTIME SLIPDISPLAYDUBBINGHDD DVDHDD DVD SD PCTIME SLIP DRIVE SELECT / x1.3OPEN/CLOSEPC CARDEJECTSD CARDPOWER3 4 2 1ENTERSUB MENUERASEDRIVE SELECTHDD, DVD,SD/PCSTATUSDIRECTNAVIGATOR∫∫NumberedbuttonsHDD, DVD, SD, PC indicatorSD card slotPC card slot Inserting/Removing the SD/PC cardInserting the cardRemoving the cardInserting the cardThere are cards requiring adaptors (➡ page 21).Removing the card≥If using the adaptor, remove the adaptor and card together.POWERInsert label up with cut-off corner at the right.Insert straight-in until it fitsinto space.12POWERPress on the center of the card.Draw straight out.POWER21Hold the edge of the card and insert until itfits into place.≥If using the adaptor, do not press directlyon the card.Terminal connections facing into the unit2 align to matchthe markThe labeled side facing upwardsPOWER1 2Push Eject buttoncomes out Push again