Panasonic DMR-E55S Operating Instructions Manual

Also see for DMR-E55 Diga: Operating instructions Bedienungsanleitung

Contents

38RQT7444Convenient functionsChanging the unit’s settingsRefer to the control reference on page 34.1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select “SETUP”and press [ENTER].3 Press [3, 4] to select “Tuning” andpress [1].You can add or delete channels, or change programme positions.4 Press [3, 4] to select “Manual” andpress [ENTER].To delete a programme positionPress [3, 4, 2, 1] to select a programme position and press [A].To add a blank programme positionPress [3, 4, 2, 1] to select a programme position and press [B].To move a TV station to another programme position1 Press [3, 4, 2, 1] to select a programme position and press[C].2 Press [3, 4, 2, 1] to select the new programme position towhich you want to assign the TV station and press [ENTER].∫ To change the tuning settings for individualprogramme position5 Press [3, 4, 2, 1] to select aprogramme position and press[ENTER].Press [3, 4] to select an item and press [1].TuningManualSETUPOthersTuningManualAuto-Setup RestartManual TuningPos Name Ch Pos Name ChB CADeleteAddMove1 ARD 42 ZDF 23 N3 54 HR3 85 BR3 1067891011121314151617181920SELECTENTERRETURNPos To change the programme position in whichthe TV stations are assignedPress [3, 4] or numbered buttons to select thenumber of the desired programme position andpress [ENTER].Name To enter or change the name of a TV stationPress [3, 4, 2, 1] to enter station name andpress [ENTER].If the station name needs a blank space, selectthe blank between “Z” and “¢”.Channel To enter newly available TV stations or changethe channel number of an already tuned TVstationPress [3, 4] or the numbered buttons to enterthe channel number of the desired TV station.Wait a few moments until the desired TV stationhas been tuned.After the desired TV station is tuned, press[ENTER].Fine Tuning To obtain the best tuning conditionPress [3, 4] to adjust the best tuning conditionand press [ENTER].≥Press [1] to return to “Auto”.Mono To select the type of sound to be recordedPress [3, 4] to select “On” if the stereo sound isdistorted due to inferior reception conditions, or ifyou want to record the normal (mono) soundduring a stereo, bilingual or NICAM broadcast,and press [ENTER].PosNameChannelFine TuningMono14AutoRETURN : leaveManualTuning ARDOffCHANGERETURN