Panasonic DMR-E75VS Operating Instructions Manual

Also see for Diga DMR-E75V: Operating instructions

Contents

Timer Recording29Note≥“ ” flashes when the unit cannot perform timer recording (non-recordable disc or protected disc, etc.). Check the disc carefully.≥The actual time recorded may be longer than the program itselfwhen TV programs are recorded using VCR Plus_ system.≥When recording more than one program in a row, for DVD-RAM thefirst few seconds, and for DVD-R about the first 30 seconds of allprograms from the second one onwards will not be recorded.≥If you set “DST” (Daylight Saving Time) to “ON” when manuallysetting the clock (l 46), timer recording may not work whensummer switches to winter and vice versa.≥When the unit is carrying out a timer recording:- You may utilize playback.≥When the disc is not inserted, the disc is full or a non-recordabledisc is inserted, the warning message appears because TimerRecording is disabled.∫ To stop recording while a program is workingPress [∫, STOP], then [ENTER] within 5 seconds.≥You can also press and hold [∫] on the main unit for more than 3seconds to stop recording.≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Preparation≥Press [DVD].[1] Press [PROG/CHECK].Icon explanations (A)¥ Now recordingW Programs are overlapped. Recording of the program with thelater start time starts before the earlier program finishesrecording.n You stopped a weekly or daily timer recording. The icondisappears the next time the timer starts recording.F The disc was full. (no enough space)The TV program is not allowed to record by copy-guard.X Recording stopped (Dirty disc, etc.)CHECK (B)OK: Recordable# (Date): The last day of daily or weeky recording.!: Recording stopped (no disc or protected disc, etc.)[2] Press [3, 4] to select the program.≥You may also select program by inputting a 2-digit numberusing the numeric buttons.e.g.: “5”: [0] )[5]“15”: [1] )[5]≥Use [2, 1] to move to the preceding or following page.[3] Press [CANCEL/RESET, ¢] to delete,You cannot delete programs that are currently recording.or press [ENTER] to change.The timer recording setting screen appears.[4] If you pressed [ENTER] in step 3,Use [3, 4, 2, 1] to change and press [ENTER].[5] Press [RETURN].For your reference≥Programs that failed to record are not deleted from the listimmediately (indicated in gray), but are deleted from the listautomatically at 4 a.m. two days later.≥During timer recording, you can change the end time as long as therecording mode is not “FR”.Timer recording for TV programs cannot be executed on both DVDand VHS at the same time.Make sure the timer recording start times do not overlap on bothDVD (l left) and VHS (l 53) timer-programming screens.When the timer recording settings overlap:≥When the start time of both timer recordings is the same, the timerrecording of DVD has priority.≥When tuner channels are specified in timer recordings on both VHSand DVD, only one timer recording can be started.≥When the interval between the first timer recording and the secondtimer recording on DVD is 1 minute or less as shown below, thesecond timer recording on DVD has priority over the timerrecording on VHS even if its start time is later than the timerrecording on VHS.Preparation≥Press [DVD].Check, change or delete programsWFXTIMERRECORDING Remaining Recording Time 4:00 LPMODE CHECKOFFONNo CHANNEL DATENew Timer Program12:57 PM7/13 TUEA BCautions for using timer recording onDVD and VHS1 minute4 CH10 CH2 CHVHSDVDDVD