Panasonic DMR-ES20DEB Operating Instructions Manual

Also see for Diga DMR-ES20DEB: Quick start guide Operating instructions

Contents

RAM-R ( )-RW V +RManual programming! Press PROG/CHECK. The TIMER RECORDING screen appears.! Confirm the highlighted line with ENTER.! Use to select the name of the TV station.! Use to switch to the next field and change entry using .Name, Date, Start and Stop can also be entered using the numeric buttons.If you record several programmes in a row, the first few seconds of the followingprogramme are not recorded on the disc,approx. 30 seconds.TIMER-controlled recordings! If you want to enter the programme name, use to select [Programme Name]and confirm with ENTER.! Once you have made all changes, save the programme with ENTER.! To continue programming, select [New Timer Programme].! Press TIMER to switch the unit to TIMER standby mode.The symbol lights up in the unit display.! To cancel or pause the recording, press TIMER again.TIMERRECORDING Remain 1:58 SP12:09:37 18/11 THUENTERRETURN CANCELDate Start Stop Mode STTLNameProgramme NamePress ENTER to input a programme name.1 BBC1 18/11 THU 7:50 8:50 SP ONBBC1VPSPDCNr Name Datum ModeStopStartTIMERRECORDINGSTTLPDCNo. Name Date ModeStop DiscspaceStartNew Timer Programme01 BBC1 18/11 THU 0:30 ON0:00 SP !02 ITV 18/11 THU 11:30 ON10:00 SP !ENTERRETURN CANCELRemain 1:58 SP12:09:37 18/11 THUPress ENTER to store new programme.PROG/CHECK34ReminderA Timer Recording will start ina few seconds. Press TIMER buttonto record or RETURN button to cancel.ReminderIf you enter a TIMER programming and do not switch the recorder to TIMER standbybecause you want to watch a television programme, then you will be reminded of thepending start 1 minute before the recording starts.! Press TIMER if you want to start the timer recording.! Press RETURN if want to cancel the timer recording.Even if you forget or don't want to press TIMER to switch to TIMER standby, the recorder will start recording.You have to press RETURN for cancelling the timer recording.Checking, changing or deleting TIMER RECORDINGS! Press PROG/CHECK.! Use to select the TIMER RECORDING.Delete a programme with CANCEL.Programmes that are currently being recorded cannot be deleted.Check the settings or correct them if necessary using ENTERand . Confirm your changes with ENTER.Programmes that are currently being recorded cannot be changed.Checking or changingDeletingIf you selected PDC [ON], TIMER-controlled recordings are deleted from the list after two days.Make sure that the unit is switched to TIMER standby mode.The symbol lights up in the unit display.VPSPDCNr Name Datum ModeStopStartTIMERRECORDING Remain 1:58 SP12:09:37 18/11 THUSTTLPDCNo. Name Date ModeStop DiscspaceStartNew Timer Programme01 BBC1 MON-SAT 8:30 ON8:00 SP02 ITV 18/11 THU 15:30 ON15:00 SP03 CH4 18/11 THU 11:30 ON10:30 SP !ENTERRETURN CANCEL10.2.OK[Chan. Name] CH4[Prog. Name] The best movie selection: "Gone with the wind"PROG/CHECKStorage space on the discOK: There is enough storage space available on the disc for the recording.If PDC is switched on during the recording, then the entire programme will probablynot be recorded.(Date): For recordings that are made daily or weekly, the display indicates whether there isenough storage space on the disc.!: Is displayed if the disc is not in the unit, is write-protected or does not have enoughstorage space.29