Panasonic DMR-ES20DEB Operating Instructions Manual

Also see for Diga DMR-ES20DEB: Quick start guide Operating instructions

Contents

TuningDiscPictureSoundDisplayConnectionSETUPOthersSELECTRETURNTAB7Remote ControlClockOwner IDChange the code of the remote control so that you can also use another it at thesame time.Panasonic DVD un[DVD 1] [DVD 2] [DVD 3]Quick StartShipping ConditionDefault SettingsAll settings except for the security levels with associated password and the time settings are reset to their factory settings.All settings except for the programmed channels, time, country, language and disc-language settings, the securitylevels including password and the remote-control code are reset to the factory settings.ENTER ENTEROthers Setting Option[On] [Off]On: The device is ready for use from standby mode after approx. 2 seconds. Standby mode uses more power.Off: If you select Quick Start [Off], the programme information for TV Guide need to be reloaded after Power ON.OnDVD 1ClockQuick StartOwner IDShipping ConditionRemote ControlDefault Settings47System UpdateSystem Update4818Load new software to your unit or update the programme guide during the night.Secure the unit with your own PIN number and your own personal information.Set the date and time.ClockOffAutomatic0 00 00 1 1 2005: : . .Time DateCHANGEENTER RETURNPlease set the clock.ENTER: access RETURN: leaveENTER ENTEROthers Onwer ID OptionOwner ID! Use and press the Numeric buttons or to enter a four-digit PIN number.! Press to correct the digit.! Press the ENTER button twice to confirm.! Enter the [Name], [House No] and [Postcode] in the same way, using .! Press the ENTER button to confirm each entry.! Press the RETURN button to leave the Owner ID screen.To display the Owner ID information on TV! On the unit press STOP for more than 5 seconds.! Use to switch automatic mode to [Off] and confirm with ENTER.! Use and to change Time and Date.! Confirm the change with ENTER.ENTER ENTEROthers Clock OptionThe PIN number is not displayed.After 30 seconds this menu automatically disappears.The clock will normally be set correctly during Auto-Setup however, in some circumstancesthe DVD Recorder cannot set the clock automatically. In this case follow the operation stepsbelow to manually set the clock.To activate the automatic time correction functionThe correct time for the clock can be automatically maintained when the DVD Recorder istuned to a station that transmits a time signal.! Use to switch automatic mode to [On] and confirm with ENTER.The automatic setting of the clock begins.! Under adverse reception conditions, etc., the Automatic time correction function may notwork. In this case the indication for Clock setting is automatically reset to MANUAL.If the reception conditions improve later on, it is possible to activate this function.Clock settingIf Clock setting is set to AUTO, do notset it to MANUAL, otherwise theautomatic time correction function isdeactivated.This DVD Recorder uses a 24 hourclock. In case of a power failure anautomatic back-up system maintainsthe clock for approximate 60 minutes.When Clock setting is set to AUTO,the automatic time correction functionchecks and if necessary adjusts thetime several times every day.The automatic time correction functiononly works when the DVD Recorder isin standby, it does not work in thetimer recording mode.Don't forget tochange summer time and winter time.Owner IDRETURNNameHouse No.PostcodePIN number * * * *RETURN : leave* * * * * * * * * * * * * ** * * * * * * * * * ** * * * * * * * * * *47FUNCTIONS Selection MenuSETUPTo OthersFUNCTIONS47[EPG Download in Standby], [Software Update inStandby], [Software Update Search Now]DVB only