Error Code Diagnosis contents Description Monitor Display Automatic FL displayF00 No error information Initial setting for error code in memory(Error code Initialization is possible with errorcode initialization and main unitinitialization.)No display No displayF58 Drive hardware error When drive unit error is detected, the eventis saved in memory.No display No displayF34 Initialization error when mainmicroprocessor is started upfor program recordingWhen initialization error is detected afterstarting up main microprocessor for programrecording, the power is turned offautomatically.The event is saved in memory.No display No displayUN-SUPPORTUnsupported disc error *An unsupported format disc was played,although the drive starts normally.*The data format is not supported, althoughthe media type is supported.*Exceptionally in case of the disc is dirty.“This disc isincompatible.”Display for 5 seconds.NO READ Disc read error *A disc is flawed or dirty.*A poor quality failed to start.*The track information could not be read.“Cannot read.Please check thedisc.”HARDERRDrive error The drive detected a hard error. “DVD drive error.” Display for 5 seconds.SELFCHECKRestoration operation Since the power cord fell out during a powerfailure or operation, it is under restorationoperation.*It will OK, if a display disappearsautomatically. If a display does notdisappear, there is the possibility thatdefective Digital P.C.B. / RAM drive.No displayPLEASEWAITUnit is in termination process Unit is in termination process now.“BYE” is displayed and power will be turnedoff.In case “Quick Start” of setup menu is ON, itis displayed in restoration operation for ACoff.No displayUN-FORMATUnformatted disc error You have inserted an unformatted DVD-RAM or DVD-RW that is unformatted orrecorded on other equipment.Format:This disc is notformatted properly.Format the disc inDISKMANAGEMENT?19DMR-EX75EG / DMR-EX75EC / DMR-EX75EB / DMR-EX85EG / DMR-EX85EB