Panasonic DMR-EX75EG Service Manual

Also see for Diga DMR-EX75EB: Operating instructions Quick setup guide

11.1.3. CHECKING AND REPLACING OF DVD-RAM DRIVE1. Top Case· Remove 2 Screws (A) on side and 3 rear Screws (B)· Remove Top Case2. Front Panel· Unlock 2 Locking Tabs on side and 3 Locking Tabs on bottom· Remove Front Panel3. SD Card P.C.B.· Remove 2 Screws· Lift up SD Card P.C.B. and wrap it with insulation sheet.4. HDD· Remove 4 Screws fixing HDD Angle to remove it with HDD· Disconnect FFC from HDD5. RAM/Digital P.C.B. Module· Remove 4 Screws fixing DVD-RAM Drive· Disconnect FFC from HDMI P.C.B.· Lift up Digital P.C.B. slightly to disconnect Main P.C.B. Connector and DV IN P.C.B. Connector on the bottom side.· Take DV IN P.C.B. out of the Main P.C.B. and attach it to the Digital P.C.B.· Put RAM/Digital P.C.B. Module on the side.Connect Extension Cable:− between Main P.C.B. and DVD-RAM Drive with RFKZ0260− between Hard Disc Drive and Digital P.C.B. with FFC Extension Cable RFKZ0366− between HDMI P.C.B. and Digital P.C.B. with FFC Extension Cable RFKZ0366CautionOrginal screws should be used.39DMR-EX75EG / DMR-EX75EC / DMR-EX75EB / DMR-EX85EG / DMR-EX85EB