Panasonic DMR-EZ47VP Service Manual

Error Code Diagnosis contents Description Monitor Display Automatic FL displayPLEASEWAITUnit is in termination process Unit is in termination process now.“BYE” is displayed and power will be turnedoff.In case “Quick Start” of setup menu is ON, itis displayed in restoration operation for ACoff.No display“0” is displayed one by one.UNFORMATUnformatted disc error You have inserted an unformatted DVD-RAMor DVD-RW that is unformatted or recordedon other equipment.7.1.2. (DVD) Special Modes SettingItem FL display Key operationMode name Description Front KeyTEST Mode *All the main unit´s parameters are initialized. Press [VHS to DVD COPYING],[REC] and [OPEN/CLOSE] keyssimultaneously for five secondswhen power is off.Rating password The audiovisual level setting password isinitialized to “Level 8”.No display When the power is on (E-E mode).While the tray is open, press [REC]and [PLAY] simultaneously for 5seconds.Service Mode Setting every kind of modes for servicing.*Details are described in “7.1.3. (DVD)Service Modes at a glance”.When the power is off, press [VHSto DVD COPYING], [OPEN/CLOSE]and [STOP] keys simultaneously for5 seconds.Forced disc eject Removing a disc that cannot be ejected.The tray will open and unit will shift to P-offmode.*During Schedule Recording, Forced disceject is invalid.While Demonstration Lock is being set, thisForced disc eject function is not accepted.The display before executionleaves.When the power is off, press[STOP] and [CH UP] keyssimultaneously for 5 seconds.Forced power-off When the power button is not effective whilepower is ON, turn off the power forcibly.*When Schedule Recording is ON, execute“Forced Power-off” after releasing ScheduleRecording.Display in P-off mode. Press [POWER] key over than 10seconds.Aging Perform sequence of modes as * AgingDescription shown below continually.Display following the then mode. Set DRIVE SELECT to DVD.When the power is ON, press [CHDOWN], [VHS to DVD COPYING]and [OPEN/CLOSE]simultaneously for over 5 secondsand less than 10 seconds.NOTE1:If Unit has not turned into Agingmode by operations shown above,execute TEST MODE once and re-execute operation shown above.(*All the main unit’s parameters areinitialized by TEST mode.)NOTE2:If the unit has hung-up because ofpressing keys for over 10 seconds,once turn off the power, and re-execute this command.*When releasing Aging mode,press [POWER] key, AC-OFF.18DMR-EZ47VP / DMR-EZ475VP