Panasonic DMR-EZ47VP Service Manual

Item FL display Key operationMode name Description (Remote controller key)Laser power confirmation Drive state is judged based on differencebetween laser power value at shipping andpresent laser power value.If DVD-RAM disc in not inserted,[NO DISC] is displayed.If power value study was filed,[ERROR] is displayed.1. into RAMDrive in service mode. (Othermedia are assumed to be non-correspondence.)2. Press [4] [4].Turn on all FL/LEDs All segments of FL and all LEDs are turnedon.All segments are turned on. Press [5] [1] in service mode.S1 signal output Forcibly superimpose the S1 signal (approx.4.5V DC) on the EE chroma signal, and checkthe output on the S terminal.Press [5] [2] in service mode.S2 signal output Forcibly superimpose the S2 signal (approx.2V DC) on the EE chroma signal, and checkthe output on the S terminal.Press [5] [3] in service mode.Front connectioninspectionPress all front keys and check the connectionbetween Main P.C.B. and Front key Switches.(1) Each time a key is pressed,segment turned on increases oneby one.(2) Total number of keys that havebeen pressed.Press [5] [4] in service mode.*When finish this mode, press[POWER] for 10 seconds.Production Date Display Display the date when the unit was produced.YY: YearMM: MonthDD: DayPress [6] [1] in service mode.Display the accumlatedworking timeDisplay the accumulated unit´s working time.(Indicating unit: Second)Press [6] [4] in service mode.24DMR-EZ47VP / DMR-EZ475VP