Panasonic DMR-HCT230 Operating Instructions Manual

Contents

Panasonic DMR-HCT230 Operating Instructions Manual Manual pdf 30 page image

RecordingVQT5C3330Recording TV programmesTo convert the recording mode after recordingin DR modeRefer to “File Conversion”. (> 47)To confirm whether the conversion iscompletedRefer to “To confirm whether the conversion iscompleted”. (> 47)To cancel a conversionRefer to “To cancel a “During standby”conversion”. (> 48)• One recording will terminate when simultaneous recordingis being done and timer recording starts.• When the programme recorded in DR mode is converted,teletext will not be recorded.• Data service will not be recorded.• Following contents or media cannot be played back whilerecording.- Xvid and MKV file- photo- USB HDD (For data files, > 8) and USB memory• Copying cannot be performed while recording.• When “Automatic Standby after OTR” is set to “On” (> 84),this unit is turned to standby mode if this unit is notoperated for approximately 5 minutes after completing“Automatic Stop” or “Recording Time”.• When a programme is recorded in encrypted form,conversion will not start until decryption has finished.(> 31)• The title before conversion (the title recorded in DR mode)will be deleted once the conversion is completed.• Conversion will take about the same time as the recordedduration.• When the HDD does not have enough remaining space,conversion will not start.• Conversion is stopped when this unit is turned on.Conversion will start from the beginning again once the unitis switched to standby mode.• The conversion will not start if the timer recording isscheduled within the time required for the conversion.• When converted, audio content and subtitle will beconverted with the same settings as at the start ofrecording.Press [STATUS ].e.g., While recording two programmes simultaneouslyPress [STOP ∫].When recording one programme:If the following screen appearsSelect “Yes”, then press [OK].When recording two programmes:If the following screen appears1 Select the programme, then press [OK].2 Select “Yes”, then press [OK].Operation during RecordingTo check the recording programmeTo stop recordingREC2HDDREC1/OTR AUTO5Recording programmedisplayed on the TVRecording programme not displayed on the TVStop RecordingYes NoRecording of this programme is in progress.Stop this recording ?OKRETURN1Stop Recording2 recordings are in progress.Which recording would you like to stop ?OKRETURN12