Playing back videoVQT5C33 43Press [AUDIO].• It will switch depending on the contentsrecorded every time it is pressed.[HDD] [USB_HDD] (For recorded titles, > 8):1 Press [STTL ].2 Press [OK].3 Select “On” or “Off”, then press [OK].• If you want to switch the subtitle language,select it in the Basic Operation menu (> 71).Xvid and MKV:Display with “Subtitle Settings” in the BasicOperation menu (> 71).• Xvid and MKV: If the subtitles text are not displayedcorrectly, try changing the language settings (> 78, SubtitleText).[HDD] [USB_HDD] (For recorded titles, > 8)Press [TEXT ].• Teletext display mode is TOP (FLOF) only.• Some functions may not work.• Teletext cannot be displayed when the subtitles are set toON.You can switch the screen mode.Refer to “Switching the aspect ratio of thescreen”. (> 88)PreparationConnect 3D compatible TV to this unit. (> 14)• Perform the necessary preparations for the TV.Play back following the instructions displayedon the screen.Perform the following settings as necessary.3D TypeIf 3D video cannot be played back in 3D, you maybe able to play it in 3D by changing the setting.(> 73, 80)3D AVCHD OutputIf 2D AVCHD video is recognised as 3D video andcannot be played back correctly, you may be ableto play it by changing the setting. (> 73, 80)3D Playback MessageHide the 3D viewing warning screen. (> 73, 80)Changing audioSwitching subtitlesDisplaying the TeletextAspect3D video playbackPreparatory 3D settings
