Panasonic DMR-PWT550 Operating Instructions Manual

Contents

Panasonic DMR-PWT550 Operating Instructions Manual Manual pdf 22 page image

Getting startedSQT081522SettingsEasy Network Setting1 Select “Wired” or “Wireless”, then press[OK].2 Follow the on-screen instructions and makethe following confirmation and settings.“Wired” connection:- Network Connection Check- Home Network function- TV Anytime“Wireless” connection:• Before beginning wireless connectionsetup obtain your Network name (SSID).An SSID (Service Set IDentification) is aname used by wireless LAN to identify aparticular network. Transmission ispossible if the SSID matches for bothdevices.- Wireless Connection Check- Network Connection Check- Home Network function- TV Anytime3 When “Easy Network Setting is finished.”appearsPress [OK].Search for wireless network:1 Select “Search for wireless network”, thenpress [OK].2 The available wireless networks will bedisplayed. Select your network name andpress [OK].- If your Network name is not displayed,search again by pressing the red button onthe remote control.- Stealth SSID will not be displayed. Entermanually by using “Wireless Settings”.(> 71, 79)• If your wireless network is encrypted,Encryption Key Input Screen will bedisplayed.Input the encryption key of your network.3 Select “Set”, then press [OK].WPS (PUSH button):If your Wireless router supports WPS (PUSHbutton), you can easily perform the settings bypressing WPS button on it.WPS (Wi-Fi Protected Setup™) is a standard thatfacilitates settings relating to the connection andsecurity of wireless LAN devices.1 Select “WPS (PUSH button)”, then press [OK].2 Press WPS button or corresponding button ofWireless router until the lamp starts flashing.• Wi-Fi Protected Setup™-compatibleWireless router may have the mark.• For details, refer to the operating instructionsof Wireless router.3 Press [OK].Easy Network SettingOKRETURNEasy Network SettingSettings and tests for connection requiredfor home network and the Internet will beconducted.First, please select a connection mode.LAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Select “Wireless”.Current setting : WiredWiredWirelessConnection method to wireless access pointe.g.,