With Other EquipmentSQT081566Copying the HD Video (AVCHD)With OtherEquipment§ “For data files (> 10)” onlye.g., Connecting to the Panasonic video camera1 Connect the video camera or insert themedia.• Make the video camera ready for datatransfer.The menu screen appears. (> 42)2 Select “Copy Video ( AVCHD )”, then press[OK].The confirmation screen appears.3 Press [OK].4 Select the title, then press the yellow button.A check mark is displayed. Repeat this step.• Press the yellow button again to cancel.(All the recordings on the same datebecome a title.)5 Press [OK].6 Select “Start”, then press [OK].• It may take time for the copying to start.To stop copyingPress and hold [RETURN ] for 3 seconds.• The original file must be in the AVCHD standard.• If you connect a Panasonic product with a USB connectioncable, setup screen may be displayed on the connectedequipment. For details, refer to the instructions for theconnected equipment.• An AVCHD title with 100 or more scenes will be divided intotitles every 99th scene and copied.This unit cannot copy the titles in the HDD tothe media. Be careful when deleting theoriginal title after copying to the HDD.USB connection cable(optional)§video camera, etc.TimeRec timeSize 200 MB0:30XXXXXXHDDCopy Video ( AVCHD ) Destination CapacitySize002003004 AVCHDAVCHDAVCHDAVCHD001No. ChannelUSBe.g., [USB]Screen icons(NTSC)(PAL)Title recorded using a differentencoding system from that of theunit.• Titles displaying these markscannot be selected.
