NetworkSQT081564Smart Home Networking (DLNA)Wi-Fi Direct is a standard that enables wirelessLAN devices to communicate each other directlywithout a wireless broadband router.This unit can be connected wirelessly and directlyto other DLNA compatible equipment on atemporary basis, regardless of the networkconnection and settings of this unit.1 Press [FUNCTION MENU].2 Select “Wi-Fi Direct” in “Home Network”,then press [OK].3 Select the item, then press [OK].• Set up the device to be connected so that aWi-Fi Direct connection can be made. Fordetails, refer to the operating instructionsfor the device to be connected.4 Select the device to be connected, thenpress [OK].• If the device you want to connect to is notdisplayed, switch the connection methodby pressing the yellow button.If the corresponding device is not found even afterthe search is run again, select “Next” and changethe connection method.Select the connection method according to thedevice to be connected.Using Smart Home Networking(DLNA) with Wi-Fi Direct®5 When selected “DLNA Client”:Go to step 4 on page 62.When selected “DLNA Server”:Operate the playback equipment (Client).When selected “Media Renderer”:Operate the Digital Media Controller.Wi-Fi Direct compatible equipmentThis unitConnecting temporarilyWhen no devices are foundWi-Fi Direct ConnectionDevice not found.To connect with a Wi-Fi Direct compatible device,please check connection mode of pairing device andselect “Search again”.To connect with a Wi-Fi Direct incompatible device,please select “Next”.OKSearch againNextWi-Fi Direct ConnectionPlease select connection method. Press RED button tochange the wireless type of connection withthe pairing device.Press RETURN to finish.Current Wireless type :Wireless type802.11n/g/b (2.4GHz)OKRETURNWPS (PUSH button)Manual settingWPS (PIN code)