Panasonic DMR-PWT635 Operating Instructions Manual

Also see for Diga DMR-PWT530: Operating instructions Operating instructions

Contents

Panasonic DMR-PWT635 Operating Instructions Manual Manual pdf 21 page image

Getting startedVQT4L30 21After completing “Easy Setting”, you can continuewith “Easy Network Setting”.1 Select “Wired” or “Wireless”, then press[OK].[PWT635]3 When “Easy Network Setting is finished.”appears.Press [OK].• If your wireless network is encrypted, EncryptionKey Input Screen will be displayed.Input the encryption key of your network.Easy Network Setting2 Follow the on-screen instructions and makethe following confirmation and settings.“Wired” connection:- Home Network Connection Check- Home Network function- Remote Recording function- Internet Connection Test“Wireless” connection:• Before beginning wireless connectionsetup obtain your Network name (SSID).An SSID (Service Set IDentification) is aname used by wireless LAN to identify aparticular network. Transmission ispossible if the SSID matches for bothdevices.• [PWT530] If “Wireless LAN Adaptor is notconnected.” is displayed, check that theWireless LAN Adaptor is fully inserted.Alternatively, disconnect and reconnect it.If there is still no change in the display,consult your dealer for advice.- Wireless Settings- Home Network Connection Check- Home Network function- Remote Recording function- Internet Connection TestOKRETURNEasy Network SettingSettings and tests for connection requiredfor home network and the Internet will beconducted.First, please select a connection mode.LAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Select “Wireless”.Current setting : WiredWiredWirelessConnection method to wireless access pointSearch for wireless network:1 Select “Search for wireless network”, thenpress [OK].2 The available wireless networks will bedisplayed. Select your network name andpress [OK].- If your Network name is not displayed searchagain by pressing the red button on theremote control.- Stealth SSID will not be displayed. Entermanually by using “Wireless Settings”.(> 68, 78)WPS (PUSH button):If your Wireless router supports WPS (PUSHbutton), you can easily perform the settings bypressing WPS button on it.WPS (Wi-Fi Protected Setup™) is a standard thatfacilitates settings relating to the connection andsecurity of wireless LAN devices.1 Select “WPS (PUSH button)”, then press [OK].2 Press WPS button or corresponding button ofWireless router until the lamp starts flashing.• Wi-Fi Protected Setup™-compatibleWireless router may have the mark.• For details, refer to the operating instructionof Wireless router.3 Press [OK].e.g.,