RecordingVQT4L3034Timer recording1 Press [PROG/CHECK].2 Select the programme, then perform theoperations.To exit the timer recording listPress [EXIT ].• “No Data” is displayed on a series recording item if therewill be no episode of the series for the next 8 days. Werecommend you delete the “No Data” item after you confirmthe last episode of the series is recorded.To confirm and edit a timerprogrammeTo deactivate a timer programmePress the red button.• The timer icon “F” will change from red togrey.• Press the red button again to activate timerrecording standby. (The timer icon “F” willchange to red.)To delete a timer programmePress [DEL].To edit a timer programme1 Press [OK].2 Change the timer recording options.• Refer to “Timer recording options”.(> 33)3 Press [OK].To show programme informationPress [STATUS ].Channel Name Schedule SpaceNew Timer ProgrammeSAT 08/01SAT 08/0110:00 - 11:5011:00 - 11:4511:30 - 1:008:00 - 10:45SAT 08/01SAT 01/01OKOKOKRETURNPage UpPage DownTurnTimer Off Resolve overlapTotal 3/32Timer Recording 30:30HDDRemain TUE 01/01/2013 8:05Delete Infoe.g.,Screen iconsF Red: Timer recording standby is activated.Grey: Timer recording standby isdeactivated.[ Currently recording programmeA part or all of the programme will not berecorded since the programme isoverlapping.• Programme overlapping can be resolvedwith repeat programme if available.Select the programme, then press thegreen button.(> 31, If “Overlapped Timer Recording”screen appears)• This function is not available for the timerprogrammes that were set manually.The HDD is full.Copy-protected programmeIt was not recorded.The recording of the programme was notcompleted because of some reason.Auto Renewal Recording is set (> 33).Guide Link (> 31)Split Programme (> 31)Series Timer Recording (> 31)OK Displayed if the recording can fit in theremaining space(Date)Daily or weekly timer programme is set.! It may not be possible to record because:- there is not enough space left.- the number of possible titles hasreached its maximum. (> 98)- programmes are deactivated, etc.GuideS/P