101RQT9434Convenientfunctions[Required^setting]≥“Digital Audio Output” in the Setup menu (> 91)≥When this unit is connected to an amplifier with an optical digital audio cable or coaxial cable and connected to a television with an HDMI cable,you can enjoy the highest quality of audio from the disc by setting “HDMI Audio Output” to “Off” in the Setup menu (> 93). In this case audio isonly output from the amplifier not the television.≥Before purchasing an optical digital audio cable (not included), check the terminal shape of the connected equipment.∫ With OPTICAL ∫ With COAXIALConnecting VCR or Set Top Box (Terrestrial receiver, CATV, etc.)MPONENTDEO OUTOUTYRPBPAV1(TV)VIDEORGB/S VIDEOAV2(EXT)VIDEORGB/S VIDEOAVThis unit’s rear panelVCR or Set Top Box’srear panel21-pin Scart cableConnect the unit directly to the televisionIf you connect the unit through an AV selector orvideo cassette recorder to the television, videosignal will be affected by copyright protectionsystems and the picture may not be showncorrectly.≥When connecting to a television with a built-in VCRConnect to the input terminals on the televisionside if there are both television and VCR inputterminals.TelevisionVCRThis unitDO NOTConnecting an amplifier with a digital input terminalLNBLNBIN 2IN 2OPTICAL COAXIALDIGITAL AUDIO OUT (PCM/BITSTREAM) COMPONENTVIDEO OUTAUDIOOUTVIDEOLRYRPBPOPTICAL INOptical digital audiocableDo not bend sharplywhen connecting.This unit’s rear panelInsert the cable so itsshape fits correctly intothe terminal.Amplifier’s rear panelDISHOPTICAL COAXIALDIGITAL AUDIO OUT (PCM/BITSTREAM) COMPONENTVIDEO OUTAUDIOOUTVIDEOLRYRPBPCOAXIAL INCoaxial cableThis unit’srear panelAmplifier’s rear panel
