36RQT9434Advanced timer recordingEven when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press the “Red” button.≥The timer icon “F” (> 37) will change from red to grey.≥You cannot cancel timer recording standby mode as long aseven one timer icon “F” (red) remains in the timer recordinglist.≥Press the “Red” button again to activate timer recordingstandby. (The timer icon “F” will change to red.)[HDD]If you record a programme onto HDD repeatedly everyday or everyweek using timer recording, the unit will record the new programmeover the old one.This function can be used only when weekly recording or dailyrecording is selected.1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press [OK].3 Press [2, 1] to select “Renew”column.4 Press [3, 4] to select “ON” and press[OK].[Note]≥If a programme set for Auto Renewal Recording is protected orwhile playback is taking place from the HDD, or while copying, theprogramme will not be overwritten. Instead the programme set forrecording will be saved as a separate programme, and thisprogramme will be the one to be overwritten when the next AutoRenewal Recording takes place.≥When there is not enough space on the HDD, the programme maynot be recorded completely.Press [INPUT SELECT] or [W X CH] to display the programme thatyou want to stop recording on the TV screen while 2 programmesare simultaneously recording.1 Press [∫].e.g.,2 Press [2, 1] to select “Yes” andpress [OK].≥If you stop a timer recording, it will be cancelled. However, ifyou have already set a weekly, daily timer recording, therecording will start at the next scheduled time.To release the unit from timer recordingstandbyAuto Renewal RecordingTo cancel recording when timerrecording has already begunStop RecordingYes NoRecording [ ZDF 1 ]OKRETURNTimer recording of this programme in progress.Stop this timer recording ?
