Customizing Your Machine191Fax Parameter TableSetting YourMachine014 File Acceptance Report *Invalid Selecting whether the machine prints the file acceptance journal.If you set this parameter to valid, a journal will print out after anymemory communication.Valid017 Receive Mode Manual Setting the reception mode to automatic or manual.*Auto022 Substitute Receive Invalid Selecting whether the machine receives to memory when the recordingpaper runs out, toner runs out or the recording paper is jammed.*Valid024 Print Reduction Fixed Selecting print reduction mode.Fixed : Reduce received document according to setting of ParameterNo. 25.Auto : Automatically determines and reduces the incoming documentto print onto the paper loaded in the machine.*Auto025 Reduction Ratio 70% Selecting the fixed print reduction ratio from 70% to 100%. Thisparameter functions only when the fixed print reduction is selected onFax Parameter No. 24.----100%026 Polling Password (----) Setting a 4-digit password for secured polling. (See page 46)027 Polled File Save *Invalid Selecting whether the machine retains the polled document in memoryeven after the document is polled once.Valid028 Stamp at MEM. XMT Invalid Selecting whether the machine stamps the original documents whenstoring the documents into memory.(Depends on the Stamp setting on the Control Panel)*Valid031 Incomplete File Save *Invalid Selecting whether the machine retains the document in memory if thedocument is not successfully transmitted.Valid033 XMT Reduction Invalid Selecting whether the machine performs reduction when thetransmitting original is wider than the recording paper used at thereceiving machine.*Valid037 Receive to Memory (----) Enter a 4-digit password for printing the received document(s) inmemory by using.When is set to ON, this parameter is notselectable on the LCD display. (See page 83)039 PIN Code Access *None Selecting the access method (Prefix or Suffix) to dial a number with PINCode. (See page 88)SuffixPrefix042 Conf. File Save *Invalid Selecting whether the machine saves the confidential polled file evenafter the file is polled once.Valid* = Factory default settingNo. Parameter Setting CommentsMODE SETTING SELECT MODE RECEIVE TO MEMORYRECEIVE TO MEMORYContinued on the next page...
